Centre Consol ideas and questions ....
Centre Consol ideas and questions ....
Author
Discussion

jeremydb9

Original Poster:

245 posts

165 months

Saturday 23rd March 2013
quotequote all
All

I have a 2007 DB9.

My car ski slope is Piano Black and I looked at covering the centre consol (radio down to trinket holder) in car wrap black vinyl so that it was all piano black which would have been nicer ( I would have curved it above the heater knobs).

I bought some 3m stuff for the princely sum of £12 and did a few sample bits but the finish was a bit orange peel.

Has anyone tried changing the grey for anything else?

Also, and this is a ling shot ... the newer DB9 has a revised centre consol. There was one for a V8V on ebay the other day (Tony on here) that sold for £250. Does anyone know if the newer ones are size / electrically compatible?

Also .... the newer arm rests - (AM bits have one for £750 - in black sadly and mine is sandstrorm ) will they fit older models?

Thanks

Jeremy

divetheworld

2,565 posts

164 months

Saturday 23rd March 2013
quotequote all
jeremydb9 said:
All

I have a 2007 DB9.

Also, and this is a ling shot ... the newer DB9 has a revised centre consol. There was one for a V8V on ebay the other day (Tony on here) that sold for £250. Does anyone know if the newer ones are size / electrically compatible?

Also .... the newer arm rests - (AM bits have one for £750 - in black sadly and mine is sandstrorm ) will they fit older models?

Thanks

Jeremy
All thoughts that went through my mind before. I looked at the console you mentioned as the eBay item stated compatability etc. I spoke to Gaydon who say an emphatic NO. I forwarded the email to the seller I received from Aston.
If you want to donate one, I could get my electronics workshop look into a rewire to make it work. Probably a weeks labour!

£750 for an armrest...... Cough....


Edited by divetheworld on Saturday 23 March 17:08

Ikebaddog

318 posts

164 months

Saturday 23rd March 2013
quotequote all
I did this to my SL, to cover up the jank wood.

drofnavi

477 posts

168 months

Saturday 23rd March 2013
quotequote all
Has anyone tried to paint one yet. I think if it was properly prepped and pained it would look perfect. The 2013 model year Vantages are now piano black all the way down to the arm rest, I'm considering doing something with mine.

divetheworld

2,565 posts

164 months

Saturday 23rd March 2013
quotequote all
drofnavi said:
Has anyone tried to paint one yet. I think if it was properly prepped and pained it would look perfect. The 2013 model year Vantages are now piano black all the way down to the arm rest, I'm considering doing something with mine.
It is very possible, the only spoiler is the night illumination for the heater controls.
If you do embark on this, before you apply paint, scratch off some of the original grey coating next to the heater night illumination. I'd like to know if it can be laser cut back in after painting.

tonyhall38

4,194 posts

245 months

Saturday 23rd March 2013
quotequote all
i have the older stlye front console as well...which you could use for testing....

divetheworld

2,565 posts

164 months

Saturday 23rd March 2013
quotequote all
tonyhall38 said:
i have the older stlye front console as well...which you could use for testing....
Tony, I've mailed you with thoughts.