buying vagcom
Author
Discussion

JeffC

Original Poster:

1,841 posts

243 months

Monday 25th March 2013
quotequote all
I want to buy vagcom software to check faultcodes that sort of thing and noticed on ebay various sellers, some as little as £5, some at £65 going up to £300 , I pretty much dismissed the £5 deal but asked the guy selling the £65 a few questions and he said its not a Ross tech system but runs the same style. Im happy to spend the £300 but wondering if the cheaper option will do the same job ? I would be using to check cars that are around 2-6 years old.

thanks in advance.Jeff

Russ Sims

202 posts

229 months

Monday 25th March 2013
quotequote all
I bought mine from "vagcom diagnostics" on amazon. £40 + p&p. Works perfectly on my 2007 TT.

The £5 cables you have seen will prob only work on older vag cars eg mark 1 TT era.

shtu

4,613 posts

177 months

Monday 25th March 2013
quotequote all
JeffC said:
asked the guy selling the £65 a few questions and he said its not a Ross tech system but runs the same style.
For £65 it's either,

A pirated copy of the proper thing.
or
A generic OBD reader.

You want the genuine kit? Then you need to go to an outfit that are happy to state it's genuine kit, eg, http://www.gendan.co.uk/product_VCHU.html

Edit -

From the page linked...

"Please note that the VCDS (VAG-COM) interface does not ship with software on CD - the full, licensed version of the software can be downloaded on receipt of the interface (full details provided with interface)"

If you buy one, and it arrives in a plain plastic bag with a mini-cd, it's a fake and you won't get support from Ross-Tech.

Edited by shtu on Monday 25th March 09:32

JeffC

Original Poster:

1,841 posts

243 months

Monday 25th March 2013
quotequote all
thanks for that, I just looked on amazon and there is a £24 one that pretty much looks like what the ebay sellers are knocking out at £65 which seems to do everything that I would need. Its just basically to check fault codes on VAG cars that I take in px to see if there is any gremlins recorded!


Cool Mart

133 posts

245 months

Monday 25th March 2013
quotequote all
A £25 reader will read the majority of the codes for you and alert you to problems with potential purchases. This would also allow you to erase the faults until the next time they occur so you can decide if it's an old fault still held in the car's memory or a current fault.

A £300 Rosstech system will also read/delete all fault codes, but will also allow you to reprogramme the various ECU's to some degree, ie turning off seatbelt warning chimes, adjusting ride height of air suspension plus much more.

Martin

shtu

4,613 posts

177 months

Monday 25th March 2013
quotequote all
JeffC said:
Its just basically to check fault codes on VAG cars that I take in px to see if there is any gremlins recorded!
VCDS will show you pending, non-critical and intermittent codes that cheap generic readers don't, from potentially expensive parts like the suspension and aircon systems.

AGK

1,605 posts

186 months

Monday 25th March 2013
quotequote all
Gendan for genuine one or nothing IMO.

The ones at £65 are just the same as the £5 ones. Fake ones can also blow your airbag ecu on certain models.

duffy78

484 posts

170 months

Monday 25th March 2013
quotequote all
Bought my cable from ebay for about a fiver then purchased VCDS-lite for about 60 from rosstech website.


Digger

17,068 posts

222 months

Monday 25th March 2013
quotequote all
You can have mine if you like as I'm getting rid of my RS6+. Ross Tech cable and software (iirc full software). smile

Edited by Digger on Monday 25th March 17:47

SuperchargedVR6

3,138 posts

251 months

Monday 25th March 2013
quotequote all
I bought the full VCDS (new name for VAG-COM) USB+HEX-CAN lead from Ross Tech some years ago when it was about 180.

This lead has a dongle in it, so can be used on any computer without having to do the annoying 'deauthorise' > 'authorise' license shennanigans of the cheaper leads every time you change laptops.

It's more than paid for itself over the years, being 100% reliable and compatible with several VAGs of all OBD2 compliant ages, including my parents cars (08 A4 TDI and 11 plate Polo TDI) and of course my own VAGs (Corrados, Golfs, R32s etc).

As well as saving yourself 80-100 each scan (dealer rates), there is also useful stuff you can change/enable/disable in VCDS and you can monitor / record all engine information if it interests you.

Unfortunately VCDS won't do things like coding new keys or replacement instrument clusters. You need Vag Tacho for that, which is 390 Euros.

It's a nice feeling scanning your own car and then being able to research the exact part that's at fault to get the best price and fitting advice.

My only advice is to definitely use the FULL version of VCDS if possible. Some other code readers are terrible at translating the codes into meaningful English. VCDS is the best by far.

JeffC

Original Poster:

1,841 posts

243 months

Monday 25th March 2013
quotequote all
Digger said:
You can have mine if you like as I'm getting rid of my RS6+. Ross Tech cable and software (iirc full software). smile

Edited by Digger on Monday 25th March 17:47
sounds good to me , just popped u an email via your profile :-)



Edited by JeffC on Monday 25th March 17:55

GrahamC230K

384 posts

275 months

Monday 25th March 2013
quotequote all
You can get a genuine Ross-tech HEX-USB+CAN lead for approx 220 (roughly what I paid 6 months ago).

Try http://www.vagcom.biz - it is a dire website that would normally send me running but the guy is a genuine reseller of the official product.


Edited by GrahamC230K on Monday 25th March 19:52

Arctic Fox

47 posts

247 months

Monday 25th March 2013
quotequote all
After trying a couple of low cost versions I sold them on, and got the real thing from Ross Tech. It works, 1st time, every time.

Seems if you pay little, you get little, and the 'dongle' is now in the cable so works with any pc with the software on it.

DudleySquires

870 posts

265 months

Tuesday 26th March 2013
quotequote all
I'm convinced - I need one of these for my Golf! Anyone else got rid of their VAG and want to sell theirs on?

troc

4,089 posts

206 months

Tuesday 26th March 2013
quotequote all
GrahamC230K said:
You can get a genuine Ross-tech HEX-USB+CAN lead for approx 220 (roughly what I paid 6 months ago).

Try http://www.vagcom.biz - it is a dire website that would normally send me running but the guy is a genuine reseller of the official product.
That's who I got mine from, no complaints, fully authorised and pretty much always the cheapest.

fangio

989 posts

265 months

Saturday 30th March 2013
quotequote all
Website's down at the moment, but you can find him on Audi-sport.net.

JeffC

Original Poster:

1,841 posts

243 months

Sunday 14th April 2013
quotequote all
Just a quick bttt I bought the one off amazon all reviews said it works fine and have loaded it onto a samsung notebook via a usb drive, all seems to be on ok open up the screen and looks same as my local indie but when I try to work it first time it says ... first use-no config file found...click options button choose correct port test and save....

when I click test it comes with error rosstech usb interface not found ! usb library version 03.01.19 interface not found! the lead is flashing red all the time ?

Is there something I need to do to get it to work.

also worth mentioning I'm a numpty on computers !





Edited by JeffC on Sunday 14th April 16:39

jith

2,752 posts

246 months

Sunday 14th April 2013
quotequote all
JeffC said:
Just a quick bttt I bought the one off amazon all reviews said it works fine and have loaded it onto a samsung notebook via a usb drive, all seems to be on ok open up the screen and looks same as my local indie but when I try to work it first time it says ... first use-no config file found...click options button choose correct port test and save....

when I click test it comes with error rosstech usb interface not found ! usb library version 03.01.19 interface not found! the lead is flashing red all the time ?

Is there something I need to do to get it to work.

also worth mentioning I'm a numpty on computers !





Edited by JeffC on Sunday 14th April 16:39
I'm not trying to be sarcastic, but you did plug the lead into a VAG vehicle I take it?

J

JeffC

Original Poster:

1,841 posts

243 months

Sunday 14th April 2013
quotequote all
lol If you knew me and how thick I am with computers you would know why im not offended at that biggrin yeh I plugged it into an 09 plate golf and a 10 plate A3 same results for both, wasnt sure if still needed the disc in but tried it with and without and same ?

red_slr

20,981 posts

220 months

Sunday 14th April 2013
quotequote all
Try anohter USB port. I have a laptop I use for OBDS and it only works on one out of the 4 USB ports on the PC. I guess its something to do with COM ports.(guessing!)