How to snap your boat in two.
Discussion
Thanks for the offer, but that one's gone now too.
To be honest, the Avon jet RIBs with the Weber 4 stroke engine, are the worst pieces of crap I've ever seen!
The first time the shaft support bearing shat itself, I had to take the engine out to remove the shaft cover.
I couldn't get at the nuts on the soft mounts, so I removed the nuts that hold the mount onto the inner part of the hulll, only to hear a "clunk" as the backing plate fell down into the void between the inner and outer mouldings!
The main harness was like a nest of vipers dumped in the bilge.
The turbo's go for fun.
Shocking shocking build quality.
We have a Brig with a 50hp Mariner outboard now. That's a horrible thing too! But my employers like "fancy".
I miss the days I worked on the bigger yachts, and we had quality gear such as Delta's.
To be honest, the Avon jet RIBs with the Weber 4 stroke engine, are the worst pieces of crap I've ever seen!
The first time the shaft support bearing shat itself, I had to take the engine out to remove the shaft cover.
I couldn't get at the nuts on the soft mounts, so I removed the nuts that hold the mount onto the inner part of the hulll, only to hear a "clunk" as the backing plate fell down into the void between the inner and outer mouldings!
The main harness was like a nest of vipers dumped in the bilge.
The turbo's go for fun.
Shocking shocking build quality.
We have a Brig with a 50hp Mariner outboard now. That's a horrible thing too! But my employers like "fancy".
I miss the days I worked on the bigger yachts, and we had quality gear such as Delta's.
Gassing Station | Boats, Planes & Trains | Top of Page | What's New | My Stuff




