Rear hub bolt question

[debaron]

Hi all,

Am desperately trying to rebuild my rear hubs before friday and I keep running into missing bolts!!

Can anyone tell me what thread bolt is needed to go through the bearing carriers into the upright behind as shown?

Did it have a nut on the other end? Presume not as the stub axles are close up in there.






ta

Ryan

[MisterT]

Hi Ryan
My bolt list from my rebuild shows M10 x 35 cap screws for this and they should be fitted with a spring washer.

[Discopotatoes]

M10 35mm 12mm hex head withstand sprig washer

[debaron]

Many thanks again gentlemen.

MisterT I don't spose you have a copy of the bolt schedule? Or tell me where I can find it?

[MisterT]

debaron said:

MisterT I don't spose you have a copy of the bolt schedule? Or tell me where I can find it?

This is a list I made up myself when I was rebuilding back in '09, so not published anywhere.

PM me with your e-mail address and I will send you a copy of the excel spreadsheet.

Bear in mind that this is a list based on my car which has some minor mods and upgrades so might be worth cross checking with yours before ordering parts.