Discussion
Just for information and discussion really. Had 10 mins today so ran my car up to see how it was, did a 2000 mile round trip to Catalunya in it last weekend so was pretty sure it wasn't that bad!
Spec for reference is:
1998 C2 3.4 with 138K miles.
- Autofarm Silsleeve block with all the usual upgrades (IMS, Baffles etc. etc.)
- Autofarm supplied H Beam steel rods.
- Stock pistons with Autofarm Silsleeve compatible rings.
- Stock heads.
- Car Graphic exhaust system with cats and not very good tubular manifolds.
Running 97 octane BP Ultimate.
Definitely need to have a look at why it's so wavy! I suspect I have a Variocam actuator on the way out as it has a bit of a rattle at idle speed from that area.
AFR is nice though!
Spec for reference is:
1998 C2 3.4 with 138K miles.
- Autofarm Silsleeve block with all the usual upgrades (IMS, Baffles etc. etc.)
- Autofarm supplied H Beam steel rods.
- Stock pistons with Autofarm Silsleeve compatible rings.
- Stock heads.
- Car Graphic exhaust system with cats and not very good tubular manifolds.
Running 97 octane BP Ultimate.
Definitely need to have a look at why it's so wavy! I suspect I have a Variocam actuator on the way out as it has a bit of a rattle at idle speed from that area.
AFR is nice though!
Gassing Station | Porsche General | Top of Page | What's New | My Stuff