Why does it sound like I have a mini moto under my bonnet?
Why does it sound like I have a mini moto under my bonnet?
Author
Discussion

ringworm

Original Poster:

148 posts

194 months

Thursday 4th April 2013
quotequote all
Hello,

As mentioned in the description my car has developed a strange problem, it really does sound like i have a mini moto under the bonnet. Whenever i set off and get over 20-30 mph i hear this noise bulding up with the revs/road speed, its a bit like a small 2 stroke engine and certainly sounds like somethings rubbing together.

My initial amateur diagnosis led me to my front offside brake, seems possible that disc and pad are rubbing off one another as it appears on the disc face that one half is rusty and the other is clean metal with a bit of a groove dug into the disc. Also when i turn left the noise disappears. The front discs are also rather rusty and flaking. One morning the brakes failed completely and the pedal hit the floor, finally got stopped and the brakes returned to normal function, albeit a little spongy.

After some internet research i have bought 2 new discs and 4 new pads for the front and have it booked in to get fitted on April 15th, but after more hunting on the net iv found that this noise could be a plethora of issues including the alternator (which i know mines isnt in the greatest of conditions), the timing/drive/alternator/power steering belt(s) have also been raised as a possible cause of this noise, or even a wheel bearing?

Well it is going into the garage on the 15th but i would like to try and figure things out myself as id like to learn more about car mechanics etc.

Car is a 2001 Ford Focus Zetec SE 1.6 with 69,500k

Thanks in advance

HustleRussell

26,708 posts

191 months

Thursday 4th April 2013
quotequote all
Sounds like wheel bearing to me

ringworm

Original Poster:

148 posts

194 months

Thursday 4th April 2013
quotequote all
HustleRussell said:
Sounds like wheel bearing to me
Oh great!!!

s p a c e m a n

12,158 posts

179 months

Thursday 4th April 2013
quotequote all
You say speed, rather than rpm so its unlikely to be ancillarys such as the alternator. Other than brakes ect, have you checked for loose plastics, big flappy bits under the car will make a noise like the crazy frog

ringworm

Original Poster:

148 posts

194 months

Thursday 4th April 2013
quotequote all
s p a c e m a n said:
You say speed, rather than rpm so its unlikely to be ancillarys such as the alternator. Other than brakes ect, have you checked for loose plastics, big flappy bits under the car will make a noise like the crazy frog
Interesting, cant believe i didnt think to look for loose plastic etc! I will now though!

Yeah i dont think it is the revs affecting it as, if i was to drop a gear and maintain speed, it doesnt change pitch or anything.

One thing though it seems its gotten louder over the past week too.

JulesB

535 posts

190 months

Thursday 4th April 2013
quotequote all
Have you looked under the bonnet? It could be powered by a mini moto.. getmecoat

Monkeylegend

29,590 posts

262 months

Thursday 4th April 2013
quotequote all
Keep your fingers crossed you brakes don't fail again in the next 10 days. Surprised you are taking the risk and didn't get them seen to straight away.

HustleRussell

26,708 posts

191 months

Thursday 4th April 2013
quotequote all
It could also be a loose splash shield or mud guard in one of the wheel arches rubbing on the tyre, and this will take minutes to check!

mnkiboy

4,409 posts

197 months

Thursday 4th April 2013
quotequote all
ringworm said:
HustleRussell said:
Sounds like wheel bearing to me
Oh great!!!
I had a local garage supply and fit a Focus wheel bearing for £55. It's not the end of the world. However, it doesn't sound like a bearing to me.

andy-xr

13,204 posts

235 months

Thursday 4th April 2013
quotequote all
I'd be more bothered about why the brakes failed, bearing rumbles are fine to drive on for a bit but brake pedal hitting the floor isnt a winner. You might have a pipe leaking there

Superhoop

4,919 posts

224 months

Thursday 4th April 2013
quotequote all
Another vote for wheel bearing here. If the noise stops by turning left, it would generally indicate a left side bearing - the noise stops/reduces as you unload the bearing, and should if it is the bearing get slightly louder when loading the bearing more (turning right in this case)

However; It could also be a symptom of abnormal tyre wear. Have a look at the outer tread blocks of the tyres and look for feathered edges between tread blocks, creating a step between one block and the next.

ETA: the tyre wear issue is normally more associated with rear tyres, and as you describe the noise as underbonnet, I'd go with wheel bearing.

Dave^

7,903 posts

284 months

Thursday 4th April 2013
quotequote all
ringworm said:
One morning the brakes failed completely and the pedal hit the floor, finally got stopped and the brakes returned to normal function, albeit a little spongy.
Sounds to me like the friction material has come away from the backing plate of the pad.

The noise is the pad retainer clip rubbing the brake disk.

Don't be driving fast or far, if at all...

GentlePersuasion

26,140 posts

245 months

Thursday 4th April 2013
quotequote all
ringworm said:
Hello,

As mentioned in the description my car has developed a strange problem, it really does sound like i have a mini moto under the bonnet. Whenever i set off and get over 20-30 mph i hear this noise bulding up with the revs/road speed, its a bit like a small 2 stroke engine and certainly sounds like somethings rubbing together.

My initial amateur diagnosis led me to my front offside brake, seems possible that disc and pad are rubbing off one another as it appears on the disc face that one half is rusty and the other is clean metal with a bit of a groove dug into the disc. Also when i turn left the noise disappears. The front discs are also rather rusty and flaking. One morning the brakes failed completely and the pedal hit the floor, finally got stopped and the brakes returned to normal function, albeit a little spongy.

After some internet research i have bought 2 new discs and 4 new pads for the front and have it booked in to get fitted on April 15th, but after more hunting on the net iv found that this noise could be a plethora of issues including the alternator (which i know mines isnt in the greatest of conditions), the timing/drive/alternator/power steering belt(s) have also been raised as a possible cause of this noise, or even a wheel bearing?

Well it is going into the garage on the 15th but i would like to try and figure things out myself as id like to learn more about car mechanics etc.

Car is a 2001 Ford Focus Zetec SE 1.6 with 69,500k

Thanks in advance
Get the car to a garage immediately and pray that the brakes don't fail again.

Frankly, I can't believe you've been stupid enough to keep driving the car in this state. In fact, to continue to do so is an extremely reckless thing to do.


Edited by GentlePersuasion on Thursday 4th April 10:01

Justin Cyder

12,624 posts

180 months

Thursday 4th April 2013
quotequote all
andy-xr said:
I'd be more bothered about why the brakes failed, bearing rumbles are fine to drive on for a bit but brake pedal hitting the floor isnt a winner. You might have a pipe leaking there



This. You should be seeing a massive warning in the brakes failing. It sounds like your car has either a wheel bearing failure or possibly a stone trapped in the brake pad and or a massive braking system failure. Personally I wouldn't drive it again until I knew what was going on lest I killed someone with it.

SLCZ3

1,295 posts

236 months

Thursday 4th April 2013
quotequote all
With brake pressure failing and then recovery of the brakes it sounds like it could be overheating of the brake fluid and then cooling off, check your handbrake/brakes are not binding.

ringworm

Original Poster:

148 posts

194 months

Thursday 4th April 2013
quotequote all
After the brake failure, i dumped the car at home and got train to work from now on, i merely drive it to shops and back now, but i will NOT MOVE IT UNTIL I GET IT FIXED.

I know my handbrake is on its way out too and iv heard 2 loud 'KADUNK' noises coming from the handbrake area, once when stopped other was setting off on a very frosty morning when the brake failed altogether. will they be connected/related in anyway? surely cant be overheated if i just started it, drove up the road then boom pedal to the floor? iv checked fluid level and its fine, not sure on the boiling point of the car yet.

MOT is up 10th of May anyway so its going in for a good service as soon as i have the money, then obviously the MOT will root out any other issues i may have

many thanks for the advice gentlemen

Justin Cyder

12,624 posts

180 months

Thursday 4th April 2013
quotequote all
Pound to a penny you've got a master cylinder failure. Good news for you, it's an easy repair.

Superhoop

4,919 posts

224 months

Thursday 4th April 2013
quotequote all
If this is a front wheel bearing (and I still suspect it is) and it has excessive play, could the hub wobbling around not have knocked the pads back in the caliper, leading to no pedal until the pads had been pushed back onto the disc?




Justin Cyder

12,624 posts

180 months

Thursday 4th April 2013
quotequote all
No chance I think. Foot to the floor is either a catastrophic loss of fluid from both circuits - hugely unlikely or since the brakes recovered, a master cylinder seal on the way out.

s p a c e m a n

12,158 posts

179 months

Thursday 4th April 2013
quotequote all
Dave^ said:
Sounds to me like the friction material has come away from the backing plate of the pad.

The noise is the pad retainer clip rubbing the brake disk.

Don't be driving fast or far, if at all...
I like the sound of that, wheres the brake fluid level? Maybe the sudden foot to the floor incident was when the pad dropped out and the pressure came back on the second push.