Lambda cable extension wanted

[Steve_D]

Hi
On the TVR there is an extension lead running from the main loom (in the inlet valley beside the injectors) down to the sensor itself.
Does anyone have a spare one?
I need to make up a test lead so I can read Lambda signals into my oscilloscope.

Many thanks
Steve

[TVR Beaver]

I can have some made if there is any interest??...

[Steve_D]

TVR Beaver said:

I can have some made if there is any interest??...

Bottom line is I'm basically after the two connectors. It just seemed easier to find a cable as i assumed the connectors would not be readily available.

Do you have some connectors or know a source?

Steve

[GasMunkey]

Dam it!!

I threw mine away on Friday!!

[blitzracing]

I have some brand new connectors- you will need one male and one female for your tests to keep the probes connected to the ECU. Drop me a mail with your address.

Edited by blitzracing on Monday 8th April 22:08

[Steve_D]

blitzracing said:

I have some brand new connectors- you will need one male and one female for your tests to keep the probes connected to the ECU. Drop me a mail with your address.

Mail sent.
Once again....many thanks

Steve

[TVR Beaver]

Yes I do... but if Mark is sorting you out... no problem