Wearing my watch in the shower.....
Discussion
Leather straps generally start to pong during hot humid weather where they never get a chance to dry out properly. Its metabolic by-products of bacteria and fungi that are metabolising stuff both in the leather itself, and your sweat, that is making it pong.
I've always been wary of washing leather straps. I've tried it on a couple and they always seemed to feel different afterwards. I know that there are people like Panerai who make "waterproof' leather straps, but I'm not entirely convinced.
Do you wear your watch 24/7? Might help to give it a rest and wear something else for a while. If you have other watches, it's a great excuse to rotate them!!
Cheers,
Effortless.
I've always been wary of washing leather straps. I've tried it on a couple and they always seemed to feel different afterwards. I know that there are people like Panerai who make "waterproof' leather straps, but I'm not entirely convinced.
Do you wear your watch 24/7? Might help to give it a rest and wear something else for a while. If you have other watches, it's a great excuse to rotate them!!
Cheers,
Effortless.
Effortless said:
Leather straps generally start to pong during hot humid weather where they never get a chance to dry out properly. Its metabolic by-products of bacteria and fungi that are metabolising stuff both in the leather itself, and your sweat, that is making it pong.
I've always been wary of washing leather straps. I've tried it on a couple and they always seemed to feel different afterwards. I know that there are people like Panerai who make "waterproof' leather straps, but I'm not entirely convinced.
Do you wear your watch 24/7? Might help to give it a rest and wear something else for a while. If you have other watches, it's a great excuse to rotate them!!
Cheers,
Effortless.
Didn't realise the leather strap was waterproof on a Panerai! I swapped mine over to the rubber strap before I went on holiday. Doesn't really matter now as I've sold it.I've always been wary of washing leather straps. I've tried it on a couple and they always seemed to feel different afterwards. I know that there are people like Panerai who make "waterproof' leather straps, but I'm not entirely convinced.
Do you wear your watch 24/7? Might help to give it a rest and wear something else for a while. If you have other watches, it's a great excuse to rotate them!!
Cheers,
Effortless.
Fun Bus said:
Why not use a clean cloth with warm soapy water? I'd not wear my Carrera in the shower, as they're not that waterproof I don't believe.
Argh! - the waterproof myth. The way that we are going will see my 1,000m Oris only good for snorkelling in a year or two, and my 200m professional Seiko, Tissot and TAG Heuer divers watches barely fit wear whilst washing my hands...My comment as less about the Carreras watertightness and more about the erosion of the worth of waterproofing depths. I read something suggesting that 150 metres is only good for splashing about in the other day, whilst I was wearing a professional-marked ISO standard meeting 150m divers watch. 

I have a Carerra and I avoid wearing it even in the shower, mainly due to the absence of a screw-down crown. Mine is 100m rated, but it is important to remember that the 100m rating isn't actually '100m' in real terms:
Wikipedia said:
ISO 2281 water resistance testing of a watch consists of:
Resistance when immersed in water at a depth of 10 cm.
Immersion of the watch in 10 cm of water for 1 hour.
Resistance of operative parts. Immersion of the watch in 10 cm of water with a force of 5 N perpendicular to the crown and pusher buttons (if any) for 10 minutes.
Condensation test. The watch shall be placed on a heated plate at a temperature between 40 °C and 45 °C until the watch has reached the temperature of the heated plate (in practice, a heating time of 10 minutes to 20 minutes, depending on the type of watch, will be sufficient). A drop of water, at a temperature between 18 °C and 25 °C shall be placed on the glass of the watch. After about 1 minute, the glass shall be wiped with a dry rag. Any watch which has condensation on the interior surface of the glass shall be eliminated.
Resistance to different temperatures. Immersion of the watch in 10 cm of water at the following temperatures for 5 minutes each, 40 °C, 20 °C and 40 °C again, with the transition between temperatures not to exceed 1 minute. No evidence of water intrusion or condensation is allowed.
Resistance to water overpressure. Immersion of the watch in a suitable pressure vessel and subjecting it within 1 minute to the rated pressure for 10 minutes, or to 2 bar in case where no additional indication is given. Then the overpressure is reduced to the ambient pressure within 1 minute. No evidence of water intrusion or condensation is allowed.
Resistance to air overpressure. Exposing the watch to an overpressure of 2 bar. The watch shall show no air-flow exceeding 50 μg/min.
No magnetic or shock resistance properties are required.
No negative pressure test is required.
No strap attachment test is required.
No corrosion test is required.
Although a 100m Water Resistant watch is supposedly 'Suitable for recreational surfing, swimming, snorkeling, sailing and water sports' there's no way I'm going to put that to the test, given that the test is only a static water pressure test. Who knows what the equivalent water pressure is going to be with a particularly strong swim stroke, or the impact of a wave, or even a strong shower head hitting just the right spot on the crown seal. Not to mention the risk of me catching the crown accidentally and clicking it 'open' without the safety net of a screwed crown. Resistance when immersed in water at a depth of 10 cm.
Immersion of the watch in 10 cm of water for 1 hour.
Resistance of operative parts. Immersion of the watch in 10 cm of water with a force of 5 N perpendicular to the crown and pusher buttons (if any) for 10 minutes.
Condensation test. The watch shall be placed on a heated plate at a temperature between 40 °C and 45 °C until the watch has reached the temperature of the heated plate (in practice, a heating time of 10 minutes to 20 minutes, depending on the type of watch, will be sufficient). A drop of water, at a temperature between 18 °C and 25 °C shall be placed on the glass of the watch. After about 1 minute, the glass shall be wiped with a dry rag. Any watch which has condensation on the interior surface of the glass shall be eliminated.
Resistance to different temperatures. Immersion of the watch in 10 cm of water at the following temperatures for 5 minutes each, 40 °C, 20 °C and 40 °C again, with the transition between temperatures not to exceed 1 minute. No evidence of water intrusion or condensation is allowed.
Resistance to water overpressure. Immersion of the watch in a suitable pressure vessel and subjecting it within 1 minute to the rated pressure for 10 minutes, or to 2 bar in case where no additional indication is given. Then the overpressure is reduced to the ambient pressure within 1 minute. No evidence of water intrusion or condensation is allowed.
Resistance to air overpressure. Exposing the watch to an overpressure of 2 bar. The watch shall show no air-flow exceeding 50 μg/min.
No magnetic or shock resistance properties are required.
No negative pressure test is required.
No strap attachment test is required.
No corrosion test is required.
GC8 said:
My comment as less about the Carreras watertightness and more about the erosion of the worth of waterproofing depths. I read something suggesting that 150 metres is only good for splashing about in the other day, whilst I was wearing a professional-marked ISO standard meeting 150m divers watch. 
A 150m Water Resistant watch is very different to a 150m rated Diver's Watch. 
The former is tested to ISO 2281 whereas the latter (to use the term 'Diver's Watch) is tested to ISO 6425.
Mac. said:
GC8 said:
My comment as less about the Carreras watertightness and more about the erosion of the worth of waterproofing depths. I read something suggesting that 150 metres is only good for splashing about in the other day, whilst I was wearing a professional-marked ISO standard meeting 150m divers watch. 
A 150m Water Resistant watch is very different to a 150m rated Diver's Watch. 
The former is tested to ISO 2281 whereas the latter (to use the term 'Diver's Watch) is tested to ISO 6425.
iaiin said:
my carrera leaked after about 10 showers! Had it from new, thought it would be ok as my other tags have been good for years (and cheaper) Got out, and looked worse then my £10 casio i have worn in there a thousand times!
The things we buy for looks!!!!!
Many if not most 'waterproof' watches will say in the users manual not to wear them in the show or bath.The things we buy for looks!!!!!
Mac. said:
I wear my PO and G-Shocks in the shower, it gives me a chance to give them a good scrub and get all the minging dead skin and scum from out of the strap etc. 
Mine get a good rinse after every surf. Which is currently most days.
I'm sure a breaking wave exerts more pressure than a shower?!
Gassing Station | Watches | Top of Page | What's New | My Stuff




