Touch up paint....
Author
Discussion

gaz1234

Original Poster:

5,233 posts

250 months

Sunday 7th April 2013
quotequote all
Bought some for a couple of marks and now, thanks to my lack of skill, shows a couple of blobs (or as my mum said spots) on the car body work.

The first is on the plastic door trim and the other is on the rear arch.

First is about 3-5mm dia and the 2nd is 8-10mm diameter.

So, what is the best way to resolve my fk up?

Polish, t-cut, re-spray, detail, leave it, etc?

Thanks

gaz1234

Original Poster:

5,233 posts

250 months

Sunday 7th April 2013
quotequote all
anyone?

kpb

305 posts

206 months

Monday 8th April 2013
quotequote all
If you want to remove it and try again, just get a bit of rubbing compound from Halfords. Its a yellow tube a bit bigger than a toothpaste one, Damp cloth a 2 mins elbow grease you'll at least get rid of the blob.

gaz1234

Original Poster:

5,233 posts

250 months

Monday 8th April 2013
quotequote all
oh really!? cool.
cant find it tho... linky?

B'stard Child

31,180 posts

277 months

Monday 8th April 2013
quotequote all
gaz1234 said:
Bought some for a couple of marks and now, thanks to my lack of skill, shows a couple of blobs (or as my mum said spots) on the car body work.

The first is on the plastic door trim and the other is on the rear arch.

First is about 3-5mm dia and the 2nd is 8-10mm diameter.

So, what is the best way to resolve my fk up?

Polish, t-cut, re-spray, detail, leave it, etc?

Thanks
Some very fine wet and dry to take the high spot off

Then next time instead of using the bloody great brush that is attached to the lid of the touch up stick - get a cocktail stick and nibble at the end for a min to make a small paint brush effect and then dip that into the bruch to trasfer some paint and dab that into the stone chip

Tc24

533 posts

170 months

Monday 8th April 2013
quotequote all
Something like Meguiar's 105 might do the trick? Bit less harsh than a couple of the other suggestions. Follow it up with 205 or ultimate compound for a decent finish.

Stonic

175 posts

179 months

Monday 8th April 2013
quotequote all
Try using Chipex. Have used it on a few of my cars and 100 x better than a Halfords paint stick and includes everything you need in the box. Not the cheapest but easy to get a good result.

giblet

9,157 posts

208 months

Monday 8th April 2013
quotequote all
This would do the trick - http://www.i4detailing.co.uk/acatalog/Festool_De_N...

However it is a tad pricey, quickest/cheapest fix is to attempt to use some rubbing compound or fine wet and dry paper as suggested. You could always sign up on detailing world and see if there is a local member who is willing to help you out in return for beer tokens.

gaz1234

Original Poster:

5,233 posts

250 months

Wednesday 10th April 2013
quotequote all
cheers for the ideas...

gaz1234

Original Poster:

5,233 posts

250 months

Wednesday 10th April 2013
quotequote all

giblet

9,157 posts

208 months

Wednesday 10th April 2013
quotequote all
gaz1234 said:
http://www.detailingworld.co.uk/forum/showthread.p... long guide there. Like I said, sign up on dw and see if a local weekend warrior can help.

Edited by giblet on Wednesday 10th April 20:43


Edited by giblet on Wednesday 10th April 20:43

gaz1234

Original Poster:

5,233 posts

250 months

Wednesday 10th April 2013
quotequote all
yes been signed up for 5 years and posted my 2nd ever post! lol
not sure if i have the skills so will see if there is anyone local

giblet

9,157 posts

208 months

Wednesday 10th April 2013
quotequote all
gaz1234 said:
yes been signed up for 5 years and posted my 2nd ever post! lol
not sure if i have the skills so will see if there is anyone local
There are usually a few local folk who are kind enough to help out for beer tokens or a donation to a charity. You could also see if there is a meet local to you, the forecasted good weather means more and more detailing folk should be having meetups

gaz1234

Original Poster:

5,233 posts

250 months

Wednesday 10th April 2013
quotequote all
giblet said:
There are usually a few local folk who are kind enough to help out for beer tokens or a donation to a charity. You could also see if there is a meet local to you, the forecasted good weather means more and more detailing folk should be having meetups
ok, will keep an eye out..

TX1

3,016 posts

214 months

Wednesday 10th April 2013
quotequote all
This is the safest stuff, it will flatten the new blob of paint without any possibility of doing damage.
Used it may times over the years, bit pricey but it will get you out of bother.
http://www.frost.co.uk/langka-paint-chip-repair-ki...
http://www.youtube.com/watch?v=G0AkIQCka1o

Deva Link

26,934 posts

276 months

Thursday 11th April 2013
quotequote all
TX1 said:
This is the safest stuff, it will flatten the new blob of paint without any possibility of doing damage.
Used it may times over the years, bit pricey but it will get you out of bother.
http://www.frost.co.uk/langka-paint-chip-repair-ki...
http://www.youtube.com/watch?v=G0AkIQCka1o
I've used Electrolube's UltraSolve for this. Bought a couple of cans off eBay.

Works OK using a rag on something like a flat piece of plastic (such as a non-embossed credit card) to flatten the blob to the same level as the existing paint. Tricky thing is leaving the paint long enough - it stays soft for days.

Details here: http://www.detailingworld.co.uk/forum/showthread.p...

JonnyFive

29,904 posts

220 months

Thursday 11th April 2013
quotequote all
I never see the point in TUP, never looks good tbh.

gaz1234

Original Poster:

5,233 posts

250 months

Saturday 13th April 2013
quotequote all
will pics help?|

Puddenchucker

5,999 posts

249 months

Saturday 13th April 2013
quotequote all
In the past I've used Langka 'Blob Eliminator' for smoothing off touch-up paint in stone chips.
With a little bit of practice it works pretty well.

http://www.frost.co.uk/langka-paint-chip-repair-ki...

gaz1234

Original Poster:

5,233 posts

250 months

Sunday 14th April 2013
quotequote all
Puddenchucker said:
In the past I've used Langka 'Blob Eliminator' for smoothing off touch-up paint in stone chips.
With a little bit of practice it works pretty well.

http://www.frost.co.uk/langka-paint-chip-repair-ki...
which kit, there are two?