boot silver bits
boot silver bits
Author
Discussion

kennybgr8

Original Poster:

379 posts

172 months

Thursday 11th April 2013
quotequote all
Ok another simple request, I need 2 silver bits that go behind the boot hinches held on by mastic who sells them,,,

Goaty Bill

1,779 posts

181 months

Thursday 11th April 2013
quotequote all
clicky

I would use Araldite Precision rather than mastic. The one with the blue cap.


ETA
If yours were held on by mastic, that would probably explain why it / they went missing.
When I had to re-stick one of mine, it was apparent that it had been stuck on originally using fibreglass resin.


Edited by Goaty Bill on Thursday 11th April 08:23

kennybgr8

Original Poster:

379 posts

172 months

Thursday 11th April 2013
quotequote all
Yea you are right there Goaty sticking them on with Resin but must 1st get a new pair,,,

Goaty Bill

1,779 posts

181 months

Thursday 11th April 2013
quotequote all
Goaty Bill said:
clicky

^^^^^^^^^^^ biggrin
clicky the clicky

kennybgr8

Original Poster:

379 posts

172 months

Thursday 11th April 2013
quotequote all
this is the part I need the tear drop shaped piece not the ring circle in front of it thats the hinch itself,,,






Goaty Bill

1,779 posts

181 months

Thursday 11th April 2013
quotequote all
Ahhh.
Mine are full round. i.e. two halves of a full round like they are selling.
Not sure exactly what years they did your style, somewhat earlier than mine though.

Those may be more difficult. I have never seen them for sale, and suspect that the breakers may be the only place to find them.

That said; I would try calling all the usual suspects though; Racing Green, TVR Power, Racetech Direct, ML Performance Parts, and even Fibreon.
I have found that there are often quite a few things that haven't yet made it onto their web sites.

kennybgr8

Original Poster:

379 posts

172 months

Thursday 11th April 2013
quotequote all
Many thanks GBill I will start phoning around ,,,

threespins

833 posts

292 months

Thursday 11th April 2013
quotequote all
I obtained some for my earlier Chim from Harrogate Horseless Carriages, so it is possible some long term dealer may have some in his store room. Try Tony at Hexham.

estutjaweh

328 posts

185 months

Thursday 11th April 2013
quotequote all
Would it not be easier/cheaper to simply make a template and get a piece of aluminium cut and polished?

kennybgr8

Original Poster:

379 posts

172 months

Friday 12th April 2013
quotequote all
Have phoned around and no luck yet, maybe have to make ones doh,,,

FastRich

542 posts

230 months

Friday 12th April 2013
quotequote all
Hia,

These chaps might have some. Worth a call.

http://www.bellhillgarage.com/tvrparts.htm

Rich

Malcster

647 posts

201 months

Friday 12th April 2013
quotequote all
Without wanting to highjack this thread, does anybody know if there is a place where I could get some pretty shiney gas rams to replace the scabby rusty ones I currently have?

I'm sure I've seen some chromed ones before?