Skinny garage - DB9 width viable?!
Discussion
Dear sirs,
I am seriously considering the purchase of a 2005 DB9 Coupe. However due to my narrow garage width I am unsure whether it would squeeze in.
I have looked for dimensions on line and found:
2,061 mm "including mirrors"
Wikipedia states
2003–08: 73.8 in (1,875 mm)
I would be most grateful if anyone out there lucky enough to own a DB9 could measure the width for me, with mirrors folded.
I will need every few cm!
Many thanks in anticipation for yoru help with the above.
Best wishes
I am seriously considering the purchase of a 2005 DB9 Coupe. However due to my narrow garage width I am unsure whether it would squeeze in.
I have looked for dimensions on line and found:
2,061 mm "including mirrors"
Wikipedia states
2003–08: 73.8 in (1,875 mm)
I would be most grateful if anyone out there lucky enough to own a DB9 could measure the width for me, with mirrors folded.
I will need every few cm!
Many thanks in anticipation for yoru help with the above.
Best wishes
Some mirrors at the far end on either side of the wall will give you a great view of where the car is and also some padding on the wall where the door opens means no damage to the car.
I have a mirror to show me the left side of the car when I go into the garage (no width issue though as it is a wide double) and a string with a weight on to show me the distance to go in.
I have a mirror to show me the left side of the car when I go into the garage (no width issue though as it is a wide double) and a string with a weight on to show me the distance to go in.
As the other guys have said it should be 2017 mm with mirrors out 1875 mm folded in, length 4710 mm.
I can't get my car in the garage without folding the mirrors, but can unfold then inside to reverse out ok (folding in again at the door!). But I have used Jockman's top tip before
Just remember Powerfold was an option on 2005 cars (along with a lot else!!) and you will need Powerfold if you are in and out of a narrow garage, full buying info via here www.astonmartinreview.co.uk if it helps
I can't get my car in the garage without folding the mirrors, but can unfold then inside to reverse out ok (folding in again at the door!). But I have used Jockman's top tip before

Just remember Powerfold was an option on 2005 cars (along with a lot else!!) and you will need Powerfold if you are in and out of a narrow garage, full buying info via here www.astonmartinreview.co.uk if it helps

Keep the mirrors folded. I have a new skinny type garage and fixed a 12" gate hinge on the garage wall, it has a 300mm square mirror which I held on with no nails before positioning. My car is as wide, although convertible, which makes getting in and out easier, the mirror set to the right height and angle does a great job for reversing.
Vroom2 said:
Thanks chaps for advice.
opening is about 7ft.
The width of my door is 7' 5" (225cm) and I can get in with mirrors out. I would expect you will fit no problem but would need to fold the mirrors.opening is about 7ft.
Garage design leaves a lot to be desired. I have a double garage, but with a brick pillar between the two openings. I fitted electric roller doors when I got my Aston to increase the width by not having door linkages encroaching on the door width.
I always reverse into mine, it is easier than driving in forward, and gives easy access to the socket for the battery charger. This does mean I have to hop over into the passenger seat to exit the car by that door!
Peter
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff




