Ignition switch

[ah544]

Hello,
I realized that in my 3000M a previous owner had installed an ignition switch from an Austin Maestro. It worked well but since therefore also the strengthening arms were missing I am going to reverse it back to original. I have bought the steering column and the TR6 Ignition switch and I now need help to put the cables in the richt place.
There are 4 cables:

- Constant electricity (brown)
- Radio on (but ignition still off)(white-brown)
- Ignition on (white)
- starter on (white-red)
Can anyone tell me where to attach those cables to the TR6 ignition switch (see picture)?


Many thanks for your help
Alex

[phillpot]

on mine the single terminal is the feed to starter solenoid, going round clockwise next is accessories (radio etc.) then live from battery and last is ignition feed.

Do you have a meter or at least a test lamp, shouldn't be difficult to check......yours may be different !

[ah544]

I checked it with a resistance meter ( after some instruction by a friend :-) ) and indeed it is slightly different. The single connector is the starter, then clockwise radio, ignition and live from battery.
Thanks, Alex