Buying ribbon cable?
Discussion
Hi all. Following the escapades in the following thread here, I took Nigel up on his kind offer of looking at my iDrive unit. (Cheers again mate, very kind of you to help).
Anyway, the damage caused is merely some damage to a ribbon cable, like this:

So, I'm trying to track one down, but I'm struggling. Google/ eBay show nothing. The cable reads the following: SUMITOMO-H AWM 20861 105C 60V VW-1
Anyone any idea how I track one down and save myself the £960 bill?
Anyway, the damage caused is merely some damage to a ribbon cable, like this:
So, I'm trying to track one down, but I'm struggling. Google/ eBay show nothing. The cable reads the following: SUMITOMO-H AWM 20861 105C 60V VW-1
Anyone any idea how I track one down and save myself the £960 bill?

The closest one I can find (UK) is
http://www.ebay.co.uk/itm/ALBA-32-LCD32HDF-LCD-TV-...
But there are too many pins. Since the connector used is push fit you may be able to find someone to cut the cable to 22 pins in width. This won't guarantee that the width between the pins is correct...
http://www.ebay.co.uk/itm/ALBA-32-LCD32HDF-LCD-TV-...
But there are too many pins. Since the connector used is push fit you may be able to find someone to cut the cable to 22 pins in width. This won't guarantee that the width between the pins is correct...
scjgreen said:
One assumes I need to match the code exactly? As well as to match the number of pins? This one isn't the same is it? Dear e,
looks like FFC/FPC flat cable to me. If so you'll need to know the conductor pitch & no. of ways, cable length, width & thickness.
Farnell search results
Are there any "connectors" on the cable itself or are there just bare conductor areas at the ends plugging into connectors on the PCBs?
regards,
Jet
regards,
Jet
looks like FFC/FPC flat cable to me. If so you'll need to know the conductor pitch & no. of ways, cable length, width & thickness.
Farnell search results
Are there any "connectors" on the cable itself or are there just bare conductor areas at the ends plugging into connectors on the PCBs?
regards,
Jet
regards,
Jet
McWigglebum4th said:
Under Mr Driller killer's thumb there is the bare end of a flat cable
So no connectors
So no connectors
@ mr driller killerIn terms of marlin, I have been there and got a big fat 'no'. I have a visit to RS planned with potentially the right thing.
From the cable itself, all I can ascertain is that it has 22 pins and is flat ended, has no connectors. It plugs into sockets soldiered on the pcb that 'clamp' it in place. also it's 12mm wide (ish).
You'd have to cut two wires off, but depending on length...
http://uk.rs-online.com/web/c/cables-wires/ribbon-...
http://uk.rs-online.com/web/c/cables-wires/ribbon-...
Apparently phoning this lot may get you somewhere, they keep popping up in help threads as sumitomo suppliers. http://www.digikey.co.uk/
s p a c e m a n said:
Apparently phoning this lot may get you somewhere, they keep popping up in help threads as sumitomo suppliers. http://www.digikey.co.uk/
Thanks spaceman. I will check them out tomorrow. Gassing Station | General Gassing | Top of Page | What's New | My Stuff



