The Golden Age of Rotary
Discussion
Just an extract of my blog which I thought I'd share with anyone interested in reading it! Currently in the process of buying an RX-7 FD and scrambled this blog together whilst researching the wankel...
Taking a long look back through the history of time we can see that man worked hard to improve upon ideas. From the use of the wheel, to the use of a tool as a weapon, to fire, to pretty much anything you use today, we all owe it to someone who worked hard and didn't give up. In the early 50′s, Motorenworke AG in Germany tried to put the newly designed wankel Rotary engine to use. They sold their stake in its patents to Mercedes Benz, who were similarly unable to improve upon the design which had built up a reputation of ‘live hard, die young’. They spent endless hours working on it in a bid to make it more reliable, more powerful, more refined and kinder to the environment but in the end, they too gave up, if even the mighty Germans failed with the wankel then surely it was doomed for the rest of time? Thankfully not…
When Mazda introduced the Cosmos, people took notice. Not just because it was a cool, sporty car, but because the engine was revolutionary – and in more than just one way. A single, somewhat curved triangular rotor (in some cases, two rotors) rotates around a spherical capsule, creating friction, and moving the output shaft. On each rotor there is a seal, which captures the air-fuel mixture, and causes a spark at its tightest interval, thus moving the car. Therefore, the car ran on a revolution setup, instead of a traditional piston setup – this was impressive, not just because of it’s alien design but because of the power output of the engine itself, for the wankel produced on average twice the power of a piston based platform per Cubic Centimeter and it wasn't until the introduction of the Cosmos that people took notice of the wankel Rotary - it was to change the automotive world, eventually being used in one of the greatest and unique sports cars of all time: The Mazda RX-7.
When Mazda introduced the sporty new RX-7 in mid 1977, they chose to use this engine, which had already been available in their pickups and other sports coupes and saloons in their range at the time. The difference between the RX-7 and the other Mazda models was that the RX-7 was marketed directly towards the petrolhead driving enthusiast, whereas the other cars in Mazda’s line were sold more as family and economy cars. The RX-7 faced stiff competition, such as the Fairylady Z and even the Corvette over in the States. It was also ambitiously pushed as a rival to the proven Porsche 924 and thus marketed as being more ahead of its time than the Volkswagen-powered Porsche. The 1977 Mazda RX-7 was a breath of fresh air, it was something new, something different and most importantly it was something special. It wore a sharp stylish body that fit like a glove in the era but with lines that would make a Porsche 911 blush, it still stood out, showing the world that it was its own car. It was small. It was nimble. But most of all, it was insanely fun. Its exhaust note was one of its only downsides with a sort of whiny tinny sound that few could enjoy, additionally it only had a pitiful 100bhp but if you were feeling edgy you could order the 135bhp 13B Sport version, which was still quite modest, even in the late 70’s. Eventually, in later years, a turbo version appeared, which offered the Savanna, a tough-as-nails 165bhp which was a little more spine tingling that original incarnations of the car.
By the time the FC rolled into the picture in 1985, the need for a small and nimble sports car to face the 924 was over. It was 944 territory now, and not just standard 944 - this was a war with the astonishing 944 Turbo. Luckily for Mazda everything about this new version of the RX-7 was breathtaking, from its wide fenders, its futuristic design and its top end electronic interior, it all was one hell of a blast to the brain as well as a feast for the eyes. The car handled better, with a brand new suspension setup and it packed a bigger punch under the bonnet too, with 146bhp as standard. You could even bump your nose up to the 200 horsepower range and really cause some wankel powered mayhem if you dared! Although it couldn’t keep up with the 220bhp that the 944 Turbo boasted, it was still a great rival, and really a great car on both road and track. All FC’s featured the 13B powerplant this time, the 12A powerplant used in the RX-7’s first guise having been discontinued.
Some would claim that the FC was the peak of the RX-7 range, with its futuristic styling and crazy electro-wizardry, yet still maintaining a light weight and an impressive weight balance. However, there are others (myself included) who would argue that the best car of the range was the FD3S. The FD3S, more simply known as the FD was unveiled in 1991 to a crowded room in the top right wing of the Tokyo Motor Show. Shown in Type R and Efini format, the car would soon dazzle many, with its smooth shape and potent 13B-REW powerplant. In standard guise, the car made a healthy 255 horsepower, but if you were really looking for the jump in performance, you could order a 271 horsepower version, with even faster sequential twin turbos. These turbos worked brilliantly, balancing torque throughout the rev range. As soon as the ECU sensed that the first turbo was lagging, it would gently press in the second turbo to compensate for the lack of power which meant the FD pulled like a train throughout the entire rev range – par the initial launch, but what more can you ask for in an early nineties twin turbo supercar!? All in all though, it didn't take much from the FD to make a statement with, its beautifully smooth shape went a long way in taking your mind off the important things in life – like a true drivers car should. 21 years after the RX-7 entered production it still has modern looks and the ability to outperform all but the fastest of sportscars that cost more than 10 times as much. On top of this, it had perfect balance with a near as makes no difference 50:50 weight deposition and staggering performance with the higher output version hitting 60 in under 5 seconds and despite a lack of driver aids such as ESP, cornering abilities matching modern day supercars standards!
In 2002, Mazda discontinued the RX-7. In its final guise, they named it the “Spirit R”, in order to show off the heritage of the car and to celebrate its many wins in Motorsport. This car was certainly rare, with only 1500 flying out of the factory, and at a hefty asking price, too. BBS wheels and red Recaro bucket seats adorned it, it sat even lower than the standard FD, had an aggressive stance and a racing-inspired manually adjustable rear spoiler. Sadly this was the end to the RX-7, 25 years after being unveiled. It was replaced by the lower-performance RX-8 the following year. The RX-8 was, and is, certainly no slouch. But will we ever have the beauty, the grace and of course those 2 f*ck off turbos of the late FD, yet again to admire? There have been several references, hints and speculations over the last several years but at the end of the day, one can only wonder, no, one can only hope.
Anybody who managed to make it to the end care to offer any feedback?
Taking a long look back through the history of time we can see that man worked hard to improve upon ideas. From the use of the wheel, to the use of a tool as a weapon, to fire, to pretty much anything you use today, we all owe it to someone who worked hard and didn't give up. In the early 50′s, Motorenworke AG in Germany tried to put the newly designed wankel Rotary engine to use. They sold their stake in its patents to Mercedes Benz, who were similarly unable to improve upon the design which had built up a reputation of ‘live hard, die young’. They spent endless hours working on it in a bid to make it more reliable, more powerful, more refined and kinder to the environment but in the end, they too gave up, if even the mighty Germans failed with the wankel then surely it was doomed for the rest of time? Thankfully not…
When Mazda introduced the Cosmos, people took notice. Not just because it was a cool, sporty car, but because the engine was revolutionary – and in more than just one way. A single, somewhat curved triangular rotor (in some cases, two rotors) rotates around a spherical capsule, creating friction, and moving the output shaft. On each rotor there is a seal, which captures the air-fuel mixture, and causes a spark at its tightest interval, thus moving the car. Therefore, the car ran on a revolution setup, instead of a traditional piston setup – this was impressive, not just because of it’s alien design but because of the power output of the engine itself, for the wankel produced on average twice the power of a piston based platform per Cubic Centimeter and it wasn't until the introduction of the Cosmos that people took notice of the wankel Rotary - it was to change the automotive world, eventually being used in one of the greatest and unique sports cars of all time: The Mazda RX-7.
When Mazda introduced the sporty new RX-7 in mid 1977, they chose to use this engine, which had already been available in their pickups and other sports coupes and saloons in their range at the time. The difference between the RX-7 and the other Mazda models was that the RX-7 was marketed directly towards the petrolhead driving enthusiast, whereas the other cars in Mazda’s line were sold more as family and economy cars. The RX-7 faced stiff competition, such as the Fairylady Z and even the Corvette over in the States. It was also ambitiously pushed as a rival to the proven Porsche 924 and thus marketed as being more ahead of its time than the Volkswagen-powered Porsche. The 1977 Mazda RX-7 was a breath of fresh air, it was something new, something different and most importantly it was something special. It wore a sharp stylish body that fit like a glove in the era but with lines that would make a Porsche 911 blush, it still stood out, showing the world that it was its own car. It was small. It was nimble. But most of all, it was insanely fun. Its exhaust note was one of its only downsides with a sort of whiny tinny sound that few could enjoy, additionally it only had a pitiful 100bhp but if you were feeling edgy you could order the 135bhp 13B Sport version, which was still quite modest, even in the late 70’s. Eventually, in later years, a turbo version appeared, which offered the Savanna, a tough-as-nails 165bhp which was a little more spine tingling that original incarnations of the car.
By the time the FC rolled into the picture in 1985, the need for a small and nimble sports car to face the 924 was over. It was 944 territory now, and not just standard 944 - this was a war with the astonishing 944 Turbo. Luckily for Mazda everything about this new version of the RX-7 was breathtaking, from its wide fenders, its futuristic design and its top end electronic interior, it all was one hell of a blast to the brain as well as a feast for the eyes. The car handled better, with a brand new suspension setup and it packed a bigger punch under the bonnet too, with 146bhp as standard. You could even bump your nose up to the 200 horsepower range and really cause some wankel powered mayhem if you dared! Although it couldn’t keep up with the 220bhp that the 944 Turbo boasted, it was still a great rival, and really a great car on both road and track. All FC’s featured the 13B powerplant this time, the 12A powerplant used in the RX-7’s first guise having been discontinued.
Some would claim that the FC was the peak of the RX-7 range, with its futuristic styling and crazy electro-wizardry, yet still maintaining a light weight and an impressive weight balance. However, there are others (myself included) who would argue that the best car of the range was the FD3S. The FD3S, more simply known as the FD was unveiled in 1991 to a crowded room in the top right wing of the Tokyo Motor Show. Shown in Type R and Efini format, the car would soon dazzle many, with its smooth shape and potent 13B-REW powerplant. In standard guise, the car made a healthy 255 horsepower, but if you were really looking for the jump in performance, you could order a 271 horsepower version, with even faster sequential twin turbos. These turbos worked brilliantly, balancing torque throughout the rev range. As soon as the ECU sensed that the first turbo was lagging, it would gently press in the second turbo to compensate for the lack of power which meant the FD pulled like a train throughout the entire rev range – par the initial launch, but what more can you ask for in an early nineties twin turbo supercar!? All in all though, it didn't take much from the FD to make a statement with, its beautifully smooth shape went a long way in taking your mind off the important things in life – like a true drivers car should. 21 years after the RX-7 entered production it still has modern looks and the ability to outperform all but the fastest of sportscars that cost more than 10 times as much. On top of this, it had perfect balance with a near as makes no difference 50:50 weight deposition and staggering performance with the higher output version hitting 60 in under 5 seconds and despite a lack of driver aids such as ESP, cornering abilities matching modern day supercars standards!
In 2002, Mazda discontinued the RX-7. In its final guise, they named it the “Spirit R”, in order to show off the heritage of the car and to celebrate its many wins in Motorsport. This car was certainly rare, with only 1500 flying out of the factory, and at a hefty asking price, too. BBS wheels and red Recaro bucket seats adorned it, it sat even lower than the standard FD, had an aggressive stance and a racing-inspired manually adjustable rear spoiler. Sadly this was the end to the RX-7, 25 years after being unveiled. It was replaced by the lower-performance RX-8 the following year. The RX-8 was, and is, certainly no slouch. But will we ever have the beauty, the grace and of course those 2 f*ck off turbos of the late FD, yet again to admire? There have been several references, hints and speculations over the last several years but at the end of the day, one can only wonder, no, one can only hope.
Anybody who managed to make it to the end care to offer any feedback?
You are a bit short with the pre-rx7 history. Here in Aus the rx2/rx3 was very popular and started the "jap performance" scene. The rotary was tunable to ridiculous power output for the day, and in a small car embarrassed many a V8.
I have fond memories of a peripheral ported 13b? powered rally car in the early '80s - the sound was epic, and so was the performance.
The first rx7 was also a front runner here in touring car racing, coming 2nd at Bathurst in 1983, racing against 5 litre (holden/gm) and 5.7 litre (ford) v8's.
ETA google "allan moffat rx7" for more racing history; he also raced the rx7 at daytona and le mans.
I have fond memories of a peripheral ported 13b? powered rally car in the early '80s - the sound was epic, and so was the performance.
The first rx7 was also a front runner here in touring car racing, coming 2nd at Bathurst in 1983, racing against 5 litre (holden/gm) and 5.7 litre (ford) v8's.
ETA google "allan moffat rx7" for more racing history; he also raced the rx7 at daytona and le mans.
Edited by AW111 on Monday 15th April 15:40
LuS1fer said:
The first production and ill-fated wankel was also the Ro80.
Citroen made a bi-rotor GS in the 70s which they had to buy back "en bloc", sharpish as it was very unreliable.
I know Norton also trialled one in a motorbike mule for a while but it never made it to production.
Suzuki RE5 was a production rotary back in the mid 70s and the Norton not only made production but also raced succesfully.Citroen made a bi-rotor GS in the 70s which they had to buy back "en bloc", sharpish as it was very unreliable.
I know Norton also trialled one in a motorbike mule for a while but it never made it to production.
OP - nice article but are you aware of any good sources of info on earlier Mazda work on rotary cars. The first rotary engine at Le Mans was way back in 1970 - a 10A 2 rotor engine in the back of a Chevron.
A chap in my local is selling a very nice FC turbo in black, with a recent leather retrim, older chap selling it, well looked after car, I was sorely tempted to add it to "the fleet" but it is a bit too similar to a 944 looks and power wise, an FD may tempt me if it has avoided the attentions of those with more enthusiasm than taste, if ever a car didnt need messing with it is the RX7 FD, was perfection, styling wise, how it left the factory, I dont think there has been a better looking mass market sports car really.
Matt UK said:
Needs pictures though to bring your words to life for those of us not fully versed on the RX-7 
I did try but I was too impatient after my first attempt at uploading failed...
So here's a pic of the on I pick up in a month or so

I'll buy you a pint if you can tell me the car sitting behind it!
Captain Muppet said:
TREMAiNE said:
Anybody who managed to make it to the end care to offer any feedback?
"Distribution" not "deposition".It reads like it's been cut-and-paste from several different sources.
Also "tough-as-nails" only applies to wankels if the nails in question are fingernails.
LuS1fer said:
The first production and ill-fated wankel was also the Ro80.
Citroen made a bi-rotor GS in the 70s which they had to buy back "en bloc", sharpish as it was very unreliable.
I know Norton also trialled one in a motorbike mule for a while but it never made it to production.
They completely oblitorated the competition to such an extent they were effectively written out of the rule books.Citroen made a bi-rotor GS in the 70s which they had to buy back "en bloc", sharpish as it was very unreliable.
I know Norton also trialled one in a motorbike mule for a while but it never made it to production.
J4CKO said:
if ever a car didnt need messing with it is the RX7 FD, was perfection, styling wise, how it left the factory, I dont think there has been a better looking mass market sports car really.
I bought one as a project car last year and the very first thing I did was to remove the aftermarket spoiler and skirts.TREMAiNE said:
A single, somewhat curved triangular rotor (in some cases, two rotors) rotates around a spherical capsule, creating friction, and moving the output shaft. On each rotor there is a seal, which captures the air-fuel mixture, and causes a spark at its tightest interval, thus moving the car.
The rotor doesn't move in a "spherical capsule", a sphere is a ball-shape. The rotor housings are epitrochoidal. Also, on each rotor, there is not just "a seal", but rotor apex tips and side seals. The rotors move on an eccentric shaft, not an "output shaft", and "creating friction" does not make this shaft turn.
The seal also does not cause a spark at its tightest interval, instead two spark plugs do per rotor. Sometimes three, in the case of the R26B four-rotor.
Gassing Station | General Gassing | Top of Page | What's New | My Stuff




