MGF stiff gearchange, any ideas?
MGF stiff gearchange, any ideas?
Author
Discussion

MGgeordie

Original Poster:

939 posts

215 months

Tuesday 16th April 2013
quotequote all
Afternoon all. Last night my missus asked Me to have a look at our MGF as She said that She was having difficulty selecting the gears (1st in particular). I jumped in & took it for a brief spin and it seemed fine. However, went out again 5 minutes later & gear selection was very difficult. It wasn't crunching and the clutch appeared to be operating ok, not slipping or any burning smell, just very hard to push into gear. Ive checked the fluid & the reservoir is full and the fluid clean. I have heard that the selector cables on these can become siezed or frayed, is this true? If so is it a big job or an easy fix?

Any other ideas?

Cheers. smile

kambites

71,703 posts

252 months

Tuesday 16th April 2013
quotequote all
Does it engage easily if you rev match? If not, does it engage easily if you double de-clutch and rev match? Does it feel like you're making metal-to-metal contact when you try to engage it or does it feel more spongy?

MGgeordie

Original Poster:

939 posts

215 months

Tuesday 16th April 2013
quotequote all
I haven't tried rev matching, maybe I should have. It doesnt crunch and doesnt feel spongy....just really hard to select.

thescamper

920 posts

257 months

Tuesday 16th April 2013
quotequote all
i believe that this can be an early indication of low oil level in the gearbox. Dont ask me how I know tho'

MGgeordie

Original Poster:

939 posts

215 months

Tuesday 16th April 2013
quotequote all
I've just read that on another forum, will check it out cheers!

kambites

71,703 posts

252 months

Tuesday 16th April 2013
quotequote all
Oil level is easy enough to check. Just take the filler plug out of the gearbox and stick your finger in the hole. The oil should be just up to the lower lip of the hole. If it isn't, just keep putting oil in until no more will fit.

MGgeordie

Original Poster:

939 posts

215 months

Tuesday 16th April 2013
quotequote all
Ok cheers. I assume is reasonably easy to access? Only gearbox oil I have lying around is some EP90 that I used to use to top the diff up in my old Triumph Herald....will that suffice?

muley

1,453 posts

312 months

MGgeordie

Original Poster:

939 posts

215 months

Tuesday 16th April 2013
quotequote all
Thanks thats great!