Help with poorly Celica GT4 ST205
Help with poorly Celica GT4 ST205
Author
Discussion

speedmachine

Original Poster:

366 posts

238 months

Tuesday 16th April 2013
quotequote all
Hi,

My younger brother has a Celica GT4 ST205 which has the following symptoms:

After starting it idles very lumpy and is on the verge of cutting out. As soon as you try to drive it cuts out. He's given it to a few local 'mechanics' all of who just seemed to have tried to guess what the issue is. The has lead to him replacing injectors (albeit used ones), replace the fuel pump and possibly a few other things. But it's still behaving the same way.

Initially the car was fine, then he left it parked up for about a month. When he finally started to use it, the above symptoms appeared on the same day.

Really want to help it get his car back on the road. Does anyone know a good mechanic who really knows these cars in West Sussex area? If not, any other advice would be greatly appreciated.

SirSamuelBuca

1,353 posts

188 months

Tuesday 16th April 2013
quotequote all
id give it a good service. and take it from there.

charge the battery too.

Baryonyx

18,295 posts

190 months

Tuesday 16th April 2013
quotequote all
Perhaps the air flow sensor or the idle control valve is fked?

speedmachine

Original Poster:

366 posts

238 months

Tuesday 16th April 2013
quotequote all
Forgot to mention, he's had the spark plugs and oil changed. Can't remember if he's changed the air filter. He originally gave it to a local garage that specialises in performance cars. But they allegedly spend 5 hours trying to diagnose the fault and came up with nothing except for a bill for 5 hours worth of labour. I have doubts as to weather they actually spent that long on the car or just saw someone young and fairly new to cars and took advantage.

Krikkit

27,941 posts

212 months

Tuesday 16th April 2013
quotequote all
Definitely a sensor fault by the sound, which one is another matter! I'd check on crankshaft sensor and speed sensor. Can it be revved stationary?

Carfiend

3,186 posts

240 months

Tuesday 16th April 2013
quotequote all
Check the water temp sensor. If it is knackered then it might read incorrectly and cold start is not working. Unplug any AFMs or other sensors to do with flow and see if it runs upto the point of boost and check all the vacuum lines.

Usually something around there.

R26Andy

404 posts

192 months

Tuesday 16th April 2013
quotequote all
Sounds like a MAF sensor

speedmachine

Original Poster:

366 posts

238 months

Tuesday 16th April 2013
quotequote all
Krikkit said:
Definitely a sensor fault by the sound, which one is another matter! I'd check on crankshaft sensor and speed sensor. Can it be revved stationary?
When he rev's it while it stationary it is very lumpy with a few pops.

I'm quite frustrated by it too. I speak to every few days to see if he's had any luck and all I hear is that it's been given to yet another mechanic who say's it's xyz. I'll mention the above sensors to him. But ideally we need that rare breed of mechanic who is actually able to fault diagnose rather than just fit parts!

speedmachine

Original Poster:

366 posts

238 months

Tuesday 16th April 2013
quotequote all
THanks for all the pointers. I'll pass this info on. Will also let you know what it finally turns out to be!

TinyCappo

2,106 posts

184 months

Tuesday 16th April 2013
quotequote all
Where about is he/the car based?

speedmachine

Original Poster:

366 posts

238 months

Tuesday 16th April 2013
quotequote all
TinyCappo said:
Where about is he/the car based?
Based in West Sussex. Could arrange for the car to get trailored a shortish distance if needed.

TinyCappo

2,106 posts

184 months

Tuesday 16th April 2013
quotequote all
Bit of a drive (basingstoke) but there is a phenomenal Garage called JDModified in Basingstoke

http://jdmodified.com/

They used to be called ToyotaGT 3S-Service center. Things like GT4 celicas and Turbo MR2's are their bread and butter.

They moved to a much bigger place and have branched out into other jap stuff. They have really good rates for work and James the guy that runs the place is straight down the line honest. I'd happily put money on that he will know whats wrong with the Celica within an hour.




Cactussed

5,364 posts

244 months

Tuesday 16th April 2013
quotequote all
Check the maf and vacuum leaks...

speedmachine

Original Poster:

366 posts

238 months

Tuesday 16th April 2013
quotequote all
TinyCappo said:
Bit of a drive (basingstoke) but there is a phenomenal Garage called JDModified in Basingstoke

http://jdmodified.com/

They used to be called ToyotaGT 3S-Service center. Things like GT4 celicas and Turbo MR2's are their bread and butter.

They moved to a much bigger place and have branched out into other jap stuff. They have really good rates for work and James the guy that runs the place is straight down the line honest. I'd happily put money on that he will know whats wrong with the Celica within an hour.
Brilliant, Thanks. Will start by getting my brother to give them a call and take it from there. It might be a bit far to get trailored (cost wise) but it's a start. smile

Mr E

23,105 posts

290 months

Tuesday 16th April 2013
quotequote all
Any codes when you interrogate the ECU (with a paperclip)?

TinyCappo

2,106 posts

184 months

Tuesday 16th April 2013
quotequote all
speedmachine said:
TinyCappo said:
Bit of a drive (basingstoke) but there is a phenomenal Garage called JDModified in Basingstoke

http://jdmodified.com/

They used to be called ToyotaGT 3S-Service center. Things like GT4 celicas and Turbo MR2's are their bread and butter.

They moved to a much bigger place and have branched out into other jap stuff. They have really good rates for work and James the guy that runs the place is straight down the line honest. I'd happily put money on that he will know whats wrong with the Celica within an hour.
Brilliant, Thanks. Will start by getting my brother to give them a call and take it from there. It might be a bit far to get trailored (cost wise) but it's a start. smile
They do have a trailer and towing stuff but this is what your breakdown cover is for wink

speedmachine

Original Poster:

366 posts

238 months

Tuesday 16th April 2013
quotequote all
Mr E said:
Any codes when you interrogate the ECU (with a paperclip)?
Errmm Not sure. I'll have to find out if any of the mechanics that have looked at it so far did that. I imagine they wouildn't have done so as it doesn't have an OBD port so probably didnt think to invesitgate it that way

speedmachine

Original Poster:

366 posts

238 months

Tuesday 16th April 2013
quotequote all
TinyCappo said:
speedmachine said:
TinyCappo said:
Bit of a drive (basingstoke) but there is a phenomenal Garage called JDModified in Basingstoke

http://jdmodified.com/

They used to be called ToyotaGT 3S-Service center. Things like GT4 celicas and Turbo MR2's are their bread and butter.

They moved to a much bigger place and have branched out into other jap stuff. They have really good rates for work and James the guy that runs the place is straight down the line honest. I'd happily put money on that he will know whats wrong with the Celica within an hour.
Brilliant, Thanks. Will start by getting my brother to give them a call and take it from there. It might be a bit far to get trailored (cost wise) but it's a start. smile
They do have a trailer and towing stuff but this is what your breakdown cover is for wink
Good point! But as the car is already at home, won't they only tow it to a local garage and not one that is about 1 hr away?

Mr E

23,105 posts

290 months

Tuesday 16th April 2013
quotequote all
speedmachine said:
Mr E said:
Any codes when you interrogate the ECU (with a paperclip)?
Errmm Not sure. I'll have to find out if any of the mechanics that have looked at it so far did that. I imagine they wouildn't have done so as it doesn't have an OBD port so probably didnt think to invesitgate it that way
Right. Get a paper clip. Bridge the terminals as described on www.gtfours.co.uk

(("how to"-----"check ecu error codes"----"st205"))

Count the flashes and work out what codes are stored in the ECU. Might give you a clue.


silent k

783 posts

262 months

Tuesday 16th April 2013
quotequote all
Cactussed said:
Check the maf and vacuum leaks...
I'd say a vacuum leak as well. I had a 200sx with similar symptoms and all that had happened was a pipe had popped off the intercooler.