removing door panels
Author
Discussion

pat49

Original Poster:

4 posts

163 months

Tuesday 16th April 2013
quotequote all
Hi, would I have any problems removing my door panels on my 3008?

MX7

7,902 posts

205 months

Tuesday 16th April 2013
quotequote all
No.

cure

231 posts

176 months

Tuesday 16th April 2013
quotequote all
3008 Superleggera?

Triumph Man

9,652 posts

199 months

Tuesday 16th April 2013
quotequote all
No problem:

Step 1: Remove Door card

Step 2: Drive car away

Step 3: Throw away door card

Step 4: Buy new car

Captain Muppet

8,540 posts

296 months

Tuesday 16th April 2013
quotequote all
>trying to be helpful<

Depends on the door, the tools you have and your skill. Some doors you just undo all the stuff screwed on (arm rests and stuff), carefully pull out the clips (sometimes tricky if you don't know where they are and don't have a suitable lever) then just lift the door card off.

Unscrewing parts is easy. Pulling clips off can break the clips, or sometimes the door card. Some cars also have airbags in the door. I've no idea what you do about those.

It might help if we knew why you need to get the door cards off - there might be a better way of doing it.

Google might throw up a service manual for your car to tell you exactly what to do.

mat205125

17,790 posts

244 months

Tuesday 16th April 2013
quotequote all
Are we talking about removing the interior trim (door card) from the door, or are we actually removing the entire door from the car?

pat49

Original Poster:

4 posts

163 months

Tuesday 16th April 2013
quotequote all
To remove two small dents as they have been glue pulled but need a bit from the inside.
I did remove the stardrives but on this new a model I wondered if there may be something new I haden't thought of on the Peugeot 3008.
Pat.

pat49

Original Poster:

4 posts

163 months

Tuesday 16th April 2013
quotequote all
No the doors will not be removed.
Stuff like airbag triggers were on my mind.
Pat.

anonymous-user

85 months

Tuesday 16th April 2013
quotequote all
Assuming you're talking about the inside, it's possible. You'll need to know exactly where the clips are around the card though, otherwise you're just shooting in the dark and potentially damaging the door for no reason.

If you're talking about the outer... impossible. It will be welded and/or bonded.

pat49

Original Poster:

4 posts

163 months

Tuesday 16th April 2013
quotequote all
Yes only the inside to rub remaining dents away.