400SE Clock Bezels?

[ElvisWedgely]

Does anyone know where I can get hold of the clock bezels that were available a while back? Who made them? Who still has any for sale? I think they would look good on my new stainless steel dash if I can get hold of any. Information most welcome.

Tony. TCB.

[Ian350]

I'm sure I got some off 2 different Ebay suppliers 3 years or so ago. The ones for the speedo and tacho were a snug push fit inside the apertures whereas the ones for the ancillary gauges where flat and had to be glued in place.

[ElvisWedgely]

Ian350 said:

I'm sure I got some off 2 different Ebay suppliers 3 years or so ago. The ones for the speedo and tacho were a snug push fit inside the apertures whereas the ones for the ancillary gauges where flat and had to be glued in place.

I've been searching through ebay for a couple of days now but still no joy. If anyone knows who may have them, please let me know.

Tony. TCB.

[chief1]

Tony,

Try this place ......
http://www.speedoheads.co.uk/p/category/0812063407...

Dave.

[RMeier]

Got mine from Richard Thorpe. Glue in with clear decorating sealant
Bob

[ElvisWedgely]

RT say they sold the last bezels two years ago and there are no more coming. Speedoheads say they don't take orders right now because they are on holiday(at least that's what it says on the web site). I may try calling them next week to see if the web site is up to date. It looks like I'm back to square one. I'll just have to keep looking but in the meantime ideas and suggestions welcome.

Tony. TCB.

[ralph350i]

Hi
not sure if these are the correct size, but worth a look

http://www.autoelectricalspares.co.uk/classic-car-...

Cheers

Ralph

[ElvisWedgely]

ralph350i said:

Hi
not sure if these are the correct size, but worth a look

http://www.autoelectricalspares.co.uk/classic-car-...

Cheers

Ralph

I have had a look at these. They are not exactly what I'm looking for as these won't push on in my case but would have to be glued on. I suppose it's better than nothing and I may have to buy these if nothing better comes up. Also they are a bit pricey and would be over 30 with the vat for all five. Thanks everyone for the info I've revived so far but any other ideas are welcome until I source what I'm looking for.

Tony. TCB.

[al 350i]

The problem you'll have is the 4 auxiliary gauges are 2 1/4", the clock is 2" and the speedo rev are just under 5"

the speedo and rev counter will fit but a touch loose, the clock is a perfect fit and the 4 auxiliary gauges will fit over gauge but can't be secured with tabs so need to be glued in place, not a hard job just fiddly, the hardest part is getting the old ones off.