LHD Mecedes ML350 CZ registered
Discussion
My friend has a 2003 Mercedes ML350 which started life in the States and is now registered in the Czech Republic and hence running about on Czech plates. The car is in the Midlands (UK) . He wants to sell it. His question to me that I couldnt anwswer and would welcome views is:
Is he better off taking it to the Czech Republic to sell it- would it be worth more or less there than in the UK bearing in mind also the time and cost of getting it there?
or sell it here in the UK - in which case are there any specialist dealers or advertising sites where he would get the best buying audience?
Is he better off taking it to the Czech Republic to sell it- would it be worth more or less there than in the UK bearing in mind also the time and cost of getting it there?
or sell it here in the UK - in which case are there any specialist dealers or advertising sites where he would get the best buying audience?
Dave_newcastle said:
started life in the States
EeeK!!!Boxes to be ticked. Could be a bit of a can of worms.
•Rear indicators are separate to the brake lights and the right colour (this is different to US cars)
•Front indicators are the right colour and have repeaters on the side of the vehicle. This may require small indicators added to the side of the car and holes drilled in the wing as appropriate to accommodate them.
•A red rear fog light is fitted - US cars often don't have these.
•The correct white parking lights are present.
•Headlights are pointing the right way - check before you bring the car in that this does not mean a costly set of new headlights!
•Tyres match the advertised top speed of the vehicle. Tyres have a code (R, S or T rating) on them which matches a theoretical top speed. If the rating is lower than the manufactirers advertised top speed - you'll need new tyres (for the SVA anyway!)
•The speedometer has Kilometer as well as Mile readings.
•The right brake fluid level indicator is present on the dashboard or else the reservoir is clear.
•The number plate meets UK standards (correct size, shape, lettering)
•Protrusion standards are met (ie removing long exhaust pipes, bull bars, mascots etc)
Gassing Station | General Gassing | Top of Page | What's New | My Stuff


