For the un-trained - how easy is it to remove coilovers?
Discussion
Following this thread (http://www.pistonheads.com/gassing/topic.asp?h=0&f=23&t=1277741&nmt=Can+you+ask+the+council+to+remove+a+speed+bump%3F&mid=162765) and discovering there is <8cm of ground clearance I am thinking to remove the coilovers on the rear and replace with uprated lowering springs to match the front of the car.
Although I am aware that i'll loose some handling ability it should improve other areas notably, especially as it is primarily a road car and is needed to drive to Croatia next month....
Tools owned are limited but include; a jack (or 2), spring compressors and a Halfords Pro tool set (Xmas present special). How easy is it to swap these over myself? (only I am able to work on it - no mechanically minded friends & Dad has no wrists or mobility after a bike accident.
Should I just get a garage to do it (new front tyres needed also) - if it over-ran a single day I have other transport
Although I am aware that i'll loose some handling ability it should improve other areas notably, especially as it is primarily a road car and is needed to drive to Croatia next month....
Tools owned are limited but include; a jack (or 2), spring compressors and a Halfords Pro tool set (Xmas present special). How easy is it to swap these over myself? (only I am able to work on it - no mechanically minded friends & Dad has no wrists or mobility after a bike accident.
Should I just get a garage to do it (new front tyres needed also) - if it over-ran a single day I have other transport
It depends very much on the car, and your prior experience. IME when attempting these things for the first time, the first one takes 3 hours and the second one takes 30 minutes, and in general the job generally hinges on some bizarre tool that your old man retained because "I don't really need it but it might be useful one day" being used for a purpose it was never designed for, and a lot of swearing. Followed by beers.
Where are you, there might be offers of assistance.
Where are you, there might be offers of assistance.
I'd seriously advise against having different suspension front and rear.
Its a CTR right?
Get the standard suspension, fit that on front and rear and it'll be much better. Sell coils hopefully make a small profit. Job done. It'll ride and handle better. Won't scrape and it's not like a CTR is on stilts as standard.
Its a CTR right?
Get the standard suspension, fit that on front and rear and it'll be much better. Sell coils hopefully make a small profit. Job done. It'll ride and handle better. Won't scrape and it's not like a CTR is on stilts as standard.
Thanks for all the pointers, I'm Orpington based.
Re. the no wrists thing, both were totally shattered and have been plated up so he's left with little or no movement.
Going back to standard was a thought but having lowered suspension was what made the car viable for insurance purposes and allowed it to qualify for a modified policy - far cheaper!, the lowering springs akin to the front were left with me when i bought it so thought it would at least match.
Raising the coilovers is a good shout, something i'll look into just to try and stop the underside scraping - it jars after a while! whilst the girlfriend has affectionately named the car 'The Chav' owing to the ride height.
Re. the no wrists thing, both were totally shattered and have been plated up so he's left with little or no movement.
Going back to standard was a thought but having lowered suspension was what made the car viable for insurance purposes and allowed it to qualify for a modified policy - far cheaper!, the lowering springs akin to the front were left with me when i bought it so thought it would at least match.
Raising the coilovers is a good shout, something i'll look into just to try and stop the underside scraping - it jars after a while! whilst the girlfriend has affectionately named the car 'The Chav' owing to the ride height.
TameRacingDriver said:
I'd seriously advise against having different suspension front and rear.
Its a CTR right?
Get the standard suspension, fit that on front and rear and it'll be much better. Sell coils hopefully make a small profit. Job done. It'll ride and handle better. Won't scrape and it's not like a CTR is on stilts as standard.
Do this. If you really need to modify it to get modified insurance, do something else, like a remap or an intake mod, which won't make it crap for driving around town and is really easy to fit. Its a CTR right?
Get the standard suspension, fit that on front and rear and it'll be much better. Sell coils hopefully make a small profit. Job done. It'll ride and handle better. Won't scrape and it's not like a CTR is on stilts as standard.
I'm not sold on fitting coilovers to improve handling on the road - any gain in stiffness and lowered centre of gravity is lost with the loss of ride compliance. I bought a big boaty barge with a small engine, but because the travel is so long on the suspension I don't have to brake much for speed bumps. In day to day driving around town it's probably faster than a Veyron.

You'll need the original struts to fit the springs onto as well, and top mounts if they are different. I strongly recommend just putting standard suspension back on, possibly with a slightly upgraded rear ARB. They handle perfectly well with normal ride height and you can drive across 4" speed bumps with impunity (with standard exhaust).
Gassing Station | General Gassing | Top of Page | What's New | My Stuff



