Just acquired this Omega Seamaster chronograph
Just acquired this Omega Seamaster chronograph
Author
Discussion

tongy89

Original Poster:

20 posts

172 months

Tuesday 30th April 2013
quotequote all
Long time lurker here in the watches section, but hopefully I have something worthwhile posting now...

I've just acquired my Father's Seamaster that he has owned for the last few years. He gave me a good deal on it and I have always admired it. I'm keen to restore it as much as I can and possibly sell on towards the end of the year or part ex for a Planet Ocean SS XL.

It's a 2004 model and long overdue a service, I have a well-reputed company local to me who have quoted me £270 for a service ( swisstimeservices), does anybody have any experience with them? Omega quoted me £450 for reference.

It has a slight defect in that the unidirectional bezel twists both ways and seems to have lost it's clicking noise. I found several references to this fault online saying that it is quite an expensive fix (usually a full bezel replacement). I went into Omega in Royal exchange yesterday and the salesman told me that he had seen it before and in fact it is only a £2 part beneath (bezel spring) that is at fault, I'd quite like a second opinion on this.

Sorry for the poor quality photo, I have cleaned it up quite nicely since taking it.




andy tims

5,606 posts

277 months

Tuesday 30th April 2013
quotequote all
STS are fine.

If the bezel is not "clicking" the spring is indeed the most likely cause.

bry1975

1,246 posts

194 months

Tuesday 30th April 2013
quotequote all
Yup those stainless ratchet springs soon work harden and the pawls simply break off.

Imo the hardest job is removing them Omega bezels not easily unless you have the correct tool BEEN there done that. biggrin

If you're stingy you can reuse the old ratchet spring and can probably make the ratchet pawls more durable, works well on Tag Heuers also!

Bry

DJFish

6,018 posts

294 months

Tuesday 30th April 2013
quotequote all
My 300m chrono diver is with STS at the moment, it's overdue a service and the bezel insert fell off the other day.

If I can't find the insert they have to replace the whole bezel adding £200 to the cost eek

I'm hoping I can find the insert!

bry1975

1,246 posts

194 months

Tuesday 30th April 2013
quotequote all
Don't pay £275 an aftermarket insert(cost £10-£20) will fit you just need plastic pliers to CAREFULLY click the sprung insert into place.

And this well respected Omega seller will happily fit Omega bezel inserts fitting cost about £10.
Item number:261200279919

Bry

Edited by bry1975 on Tuesday 30th April 17:17


Edited by bry1975 on Tuesday 30th April 17:18

tongy89

Original Poster:

20 posts

172 months

Tuesday 30th April 2013
quotequote all
Thanks for the replies so far

DJFish said:
My 300m chrono diver is with STS at the moment, it's overdue a service and the bezel insert fell off the other day.

If I can't find the insert they have to replace the whole bezel adding £200 to the cost eek

I'm hoping I can find the insert!
I'd be tempted to just get an aftermarket insert as bry suggested. STS are just down the road to me, I'm planning on popping in next week to try and speak to an engineer about my broken bezel. The salesman from Omega even gave me the part number for the spring so I'm hoping I'll arrive well informed.

bry1975

1,246 posts

194 months

Tuesday 30th April 2013
quotequote all
That's the part chap>>>




They soon work harden with Tags I use to recycle the old ratchet spring as they can be reused or replaced.

DJFish

6,018 posts

294 months

Tuesday 30th April 2013
quotequote all
Brilliant!
Didn't think to look on the popular auction website, if the original insert doesn't turn up ill just order an aftermarket jobbie as they look pretty good quality.
Cheers gents!

Chicane-UK

3,861 posts

216 months

Tuesday 30th April 2013
quotequote all
Can't go wrong with STS. Great looking Seamaster btw smile

tongy89

Original Poster:

20 posts

172 months

Wednesday 1st May 2013
quotequote all
Thanks Chicane, I love it - it's my new daily.

Bry - thanks a lot for the input. For the benefit of anybody reading, the part number for the spring is 085ST0053.

bry1975

1,246 posts

194 months

Wednesday 1st May 2013
quotequote all
Guys,

Cousins stock the Omega ratchet springs just be 100% sure you know the exact case number for
your Omega Seamaster prior to ordering.

Bry