Fixing rust myself
Discussion
Recently purchased a vehicle with some rust on the front wings, which I was going to get done professionally, but was wondering if its worth giving it a bash myself. I've never welded before, but pick stuff up quickly and have access to a few professionals at work who I can get some help from.
I imagine the procedure is to either cut the rusty part off and weld a new shaped piece in, then strip the paint back and respray (I also have a spray booth).
Worth a pop?
I imagine the procedure is to either cut the rusty part off and weld a new shaped piece in, then strip the paint back and respray (I also have a spray booth).
Worth a pop?
what car is it ?
If its even vaguely modern just buy a new (or used if you have to) wing, paint, bolt/spot weld on, job done.
If its something a bit more challenging then you need some kit.
Avoid gasless mig welders
Avoid SIP and various other cheap welders.
Half of your battle will be welding, the other shaping your patch panels to fit the contours of the wing. For this you need hammers & dollys, maybe some mallets and a sandbag too. You might even want to get in to an english wheel, but we're talking proper money now.
Look at these sites:
http://www.metalmeet.com/
http://mig-welding.co.uk/
Also here: http://www.trifive.com/forums/forumdisplay.php?f=3...
The guy that posts there as MP&C does some very, very neat work and has plenty of tips for how to work metal.
If its even vaguely modern just buy a new (or used if you have to) wing, paint, bolt/spot weld on, job done.
If its something a bit more challenging then you need some kit.
Avoid gasless mig welders
Avoid SIP and various other cheap welders.
Half of your battle will be welding, the other shaping your patch panels to fit the contours of the wing. For this you need hammers & dollys, maybe some mallets and a sandbag too. You might even want to get in to an english wheel, but we're talking proper money now.
Look at these sites:
http://www.metalmeet.com/
http://mig-welding.co.uk/
Also here: http://www.trifive.com/forums/forumdisplay.php?f=3...
The guy that posts there as MP&C does some very, very neat work and has plenty of tips for how to work metal.
Crafty_ said:
Avoid gasless mig welders
For a newbie starting out I would have to disagree with that. I learned to weld on my old mr2 when the sills faied on the MOT. Bought a Clarke 130amp gas/gasless MIG welder from machinemart and it worked a treat. Yes it's a bit more smoky and the welds aren't as neat but when you are starting out they won't be that good anyway, and once they are ground down it dosen't matter anyway. Being able to do it outside your house in the wind and not having to worry about the gas running out are additional bonuses.DaveCWK said:
For a newbie starting out I would have to disagree with that. I learned to weld on my old mr2 when the sills faied on the MOT. Bought a Clarke 130amp gas/gasless MIG welder from machinemart and it worked a treat. Yes it's a bit more smoky and the welds aren't as neat but when you are starting out they won't be that good anyway, and once they are ground down it dosen't matter anyway. Being able to do it outside your house in the wind and not having to worry about the gas running out are additional bonuses.
I had a gas less mig, burning through on every weld is not fun. They do have their place but its on thicker metal rather than bodywork IMO. Especially for a novice.Leptons said:
DaveCWK said:
For a newbie starting out I would have to disagree with that. I learned to weld on my old mr2 when the sills faied on the MOT. Bought a Clarke 130amp gas/gasless MIG welder from machinemart and it worked a treat. Yes it's a bit more smoky and the welds aren't as neat but when you are starting out they won't be that good anyway, and once they are ground down it dosen't matter anyway. Being able to do it outside your house in the wind and not having to worry about the gas running out are additional bonuses.
I had a gas less mig, burning through on every weld is not fun. They do have their place but its on thicker metal rather than bodywork IMO. Especially for a novice.Gassing Station | General Gassing | Top of Page | What's New | My Stuff



