Gremlin
Author
Discussion

Skipe

Original Poster:

616 posts

216 months

Saturday 11th May 2013
quotequote all
The T350 had a complete cut out this morning, coming to a stop, complete loss of drive! I did notice an EFI fault indicated the second time. Thankfully he came back to life and I managed to start him again a couple of times and get him home.

Assume it's a sensor or wiring? any recommendations folks? (fault finding or more likely a decent mobile electrician in London).

Edited by Skipe on Saturday 11th May 09:49

Skipe

Original Poster:

616 posts

216 months

Sunday 12th May 2013
quotequote all
Bump...

Anyone got any advice on this?

Cheers

Tom74TVR

169 posts

178 months

Sunday 12th May 2013
quotequote all
not sure if this is what you want to hear but I had the same issue with my car and it seems to be somewhere in the wiring and it seems very difficult to locate exactly, especially because it is intermittent... in my car the quality of the wiring is not good so I decided to get a complete new one made.
Good luck.
Tom.

CracklePop

31 posts

163 months

Monday 13th May 2013
quotequote all
Again not sure if it helps, similar issues cutting out or over revving , resolved by a new engine loom. I'm no expert and understand earthing points could also be a culprit. Good luck.

Gareth

SergSC

508 posts

183 months

Tuesday 14th May 2013
quotequote all
maybe try reseatting imobiliser connections, including the plug that runs under the top of the passenger foot1well, they would definetely turn off the car if disconnected or bad contact.

slimtater

1,035 posts

191 months

Tuesday 14th May 2013
quotequote all
100a fuse - maybe has a crack in it?

Skipe

Original Poster:

616 posts

216 months

Thursday 16th May 2013
quotequote all
Thanks for the suggestions folks, it's back at the garage so hoping for a good outcome, especially as it's up for sale.

Cheers