Switch and gas struts
Discussion
Hi Mate..The struts can be purchased from various suppliers..A few people have used SGS and found them a good replacement..here is a link..
http://www.google.co.uk/url?sa=t&rct=j&q=s...
Just had a look through some old switches but dont have a fan switch im affraid, I believe the headlight switch in principal is the same thing albeit with a light symbol on it..I changed all mine for new type rocker switches purely because of the rarity of certain original switches....Ziga
http://www.google.co.uk/url?sa=t&rct=j&q=s...
Just had a look through some old switches but dont have a fan switch im affraid, I believe the headlight switch in principal is the same thing albeit with a light symbol on it..I changed all mine for new type rocker switches purely because of the rarity of certain original switches....Ziga
I used a 30amp rocker switch with led when its on bought from a local motorists store(not Halfrawds) and fixed it through under side of dash board just above my right knee but ideally It should then go through a relay, I eventually bought a twin fan set up from Kenlowe and used their control relays with inbuilt override wire and temp adjuster, I'm very happy with it so far.
hi jack, i just got a new strut from sgs 01332576850 for £27. part no GS8-18-200-250
The last three numbers refer to the pressure (newtons), i ordered the 250 but in hindsight it is probably way too strong, a 200 or even 150 would probably do.
They also through in the ball sockets free of charge, part B1.
Marcus
The last three numbers refer to the pressure (newtons), i ordered the 250 but in hindsight it is probably way too strong, a 200 or even 150 would probably do.
They also through in the ball sockets free of charge, part B1.
Marcus
Gassing Station | Wedges | Top of Page | What's New | My Stuff


