How to change Power Steering Hose, 04 Monaro models and VT2
Discussion
Ok so on the way back from Wales there was a really loud squealing when cornering, so I popped the hood and the noticed the steering pump fluid had dropped, I topped it up and managed to get home. About a week later same thing and I was sure it was one of the rubber hoses from the reservoir, after changing clips and cleaning pipe still had the same problem but a lot worse. So after an hour of stripping the car and using a lot of fluid I finally found the problem and collected the new part. I made a call to Ferret for advise and he turned up to give me some guidance and of course to get dirty. 
Next step get dirty and remove protective covers.

Found the problem, which turned out to be the POWER STEERING HOSE. Corrosion was the cause of the leak and under pressure it would piss out all over the engine and engine bay which resulted in a lot of smoke.


New part.



New part fitted and the steering feel so much better. Once again thanks for all your help Nick it's much appreciated

Next step get dirty and remove protective covers.
Found the problem, which turned out to be the POWER STEERING HOSE. Corrosion was the cause of the leak and under pressure it would piss out all over the engine and engine bay which resulted in a lot of smoke.
New part.
New part fitted and the steering feel so much better. Once again thanks for all your help Nick it's much appreciated
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff


