Where to get a Nipple

[wadsapple]

Where can you surgest i get an M10 over lenth threaded bleed nipple from.I have a new M10 Ap Racing bleed nipple for the CP5555 calipers but in the recent past the old nipple was drilled out and bodged up,a standard Ap Racing nipple is not long enough in the threads now to seat down.Any help would be helpfull as i have tried all my usual sources

[Graham]

have you tried bg developments in bromsgrove ?

[sarbec]

willwood use a small brass ferrel with a bleed nipple in it you may be able to adapt one of those

[ctsdave]

Dont ford use m10bleed nipples?? Might be able to get a longer one that way? I will have a look in my catalogues tomorrow and let you know what I can get!

[wadsapple]

Thank you for suggestions so far.Dave land rover clutch Master cylinder are M10 but threads not long enough. I don't know about Ford but will go down that road shortly, if you have a moment with your sources that would be good.as I say I have a standard AP racing M10.

[TiffsTuzzy]

Perry,
I don't know if the ones Automec sell are any good:

http://automec-uk.mamutweb.com/Shop/List/Brass-Ble...

Goog luck..... Rich

[wadsapple]

Good Morning Richard that site looks like it may have the answers, thank you very much for your effort for that. I am just loading up for more action this weekend in the Castle Combe skid pan championship races and will get on the case Monday. I have had to make a temp repair for this weekends fun and games. Cheers Perry