What model Omega Seamaster is this...?
What model Omega Seamaster is this...?
Author
Discussion

Paul S4

Original Poster:

1,313 posts

241 months

Saturday 15th June 2013
quotequote all







I have just bought this watch from a local jeweller, and would like to know a bit more about it.

Dimensions are:
width including crown 41mm, width excluding crown 36mm, 12mm thick, lug width 18mm.

It is automatic, and obviously 'pre-coaxial era', and as can be seen has the 'helium escape valve' at 10 o clock on the bezel.

I can also read the serial number on one of the lugs, so can I use this to identify the year/model ?

On that note, the bezel is very stiff, and I do not want to force it, so any advice on getting that to work would also be appreciated !

I am sure some of the more knowlegeble PH'ers on here can tell me more...

thanks in advance


daveenty

2,385 posts

241 months

Saturday 15th June 2013
quotequote all
Thought at first it was a 2531.80.00 , but then I noticed your measurements.

These "should" make it a 2561.80.00, though these numbers could differ if the strap is original to it.

Happy Googling, and enjoy the watch. smile

Paul S4

Original Poster:

1,313 posts

241 months

Saturday 15th June 2013
quotequote all
Thanks for the quick response !

It currently has a new Hirsch leather strap, which is OK for now, but I would quite like to source an original steel bracelet to complete the watch.

Just bought it yesterday, so far very pleased with it, and for the price I think it will be a reasonable 'investment' ( that is the excuse for buying it anyway !!)

Any ideas about where to find a bracelet, apart from the obvious bay of E ?

JRewing

17,551 posts

210 months

Sunday 16th June 2013
quotequote all
I don't know the best place for the bracelet, but aren't they quite expensive?
If you got a very good price, this could be the reason.

marcosgt

11,506 posts

207 months

Sunday 16th June 2013
quotequote all
They are, and usually your only options are an AD or picking up a used one from eBay or a forum.

I wanted a bracelet for my Speedmaster, which came (used) on a leather strap, but I balked at the cost of a real one.

I bought one from Alpha instead and, aside from the lack of an Omega logo on the clasp, it's pretty hard to tell the difference.

They do one for the Seamaster too (not sure it'll fit the OP's model) - http://www.alpha-watch.com/details.php?myid=837

Price is low enough to be worth a gamble anyway!

M

toohuge

3,501 posts

247 months

Sunday 16th June 2013
quotequote all
The bezel on these are always stiff. As it is small and it can be difficult to turn as your fingers appear to engulf the bezel! - But nothing to worry about.

As mentioned above, this is a mid size SMP but sourcing a bracelet is going to be very expensive, probably almost as much as you paid for the watch!

Omega do a lovely rubber strap with a deployant which looks awesome.

Chris

Dominic H

3,289 posts

263 months

Sunday 16th June 2013
quotequote all
Hi OP,

I think the watch is a 2532.80.00 (ref for a 41mm pre co-ax 300m seamaster), if it was originally supplied on a bracelet.

The bezel's tend to accumulate all manner of crap which makes them stiff to turn. Warm soapy water and an old tooth brush should dislodge some of it, and ease the bezel up.

For 75CHF you can get an extract from the Omega factory archive, if the watch was produced before 2000. You'll need to get the case back off and make a note of the movement number. Here's a link to the Omega site.

http://www.omegawatches.com/spirit/history/extract...

DH

Ayahuasca

27,595 posts

310 months

Sunday 16th June 2013
quotequote all
Paul S4 said:
the bezel is very stiff, and I do not want to force it
You know it only rotates anti-clockwise right?


Paul S4

Original Poster:

1,313 posts

241 months

Sunday 16th June 2013
quotequote all
Thanks Dominic, appreciate your advice as always.

Having done some research on getting an Omega bracelet... as has been mentioned, even a good S/H one would cost me nearly as much as I paid for the watch....which is ridiculous really.

I quite like it on the leather anyway, it looks a bit more discreet.
But if I can find a 1502-824 bracelet at a really good price, then I may get it just to 'complete' the watch. I can afford to be patient...!

Paul S4

Original Poster:

1,313 posts

241 months

Sunday 16th June 2013
quotequote all
Also...I do know that the bezel is unidirectional....just not wanting to damage anything ! I may try to gently clean it as suggested and then try...

Ayahuasca

27,595 posts

310 months

Sunday 16th June 2013
quotequote all
When I got my Seamaster the bezel was super stiff. I noticed that the crystal has a microscopic crack in it so I got them to replace the watch. The replacement's bezel was much looser. Weird.