Gold Submariner options
Discussion
GreaseNipple said:
Interesting thanks, might the Seiko be a bit more hard wearing than the Invicta I wonder. Also cant you mod seiko 5's a bit if the feeling takes you.
If my (very cheap) Seiko 5 is anything to go by, it'll go through a lot. The only real damage to mine is a slightly bent link from falling out of a moving car 
Be extremely careful buying a full Gold Submariner (used).
The money is actually in the bracelet and because Gold is so soft the bracelet can get badly mullered and then you're on for a horrific service bill to rebuild the whole thing. (riveting the links is NOT the solution - it just mullers the watch even more and will eventually destroy the bracelet). And replacing the bracelet kills originality AND costs, I think, about £6000.
So bought a vintage full Gold Sub a few weeks ago (with a rather special dial) and found out in the papers that the previous owner had received a service bill from Rolex UK for £4500. Yep, £4500 for a "full Geneva Rebuild."
The money is actually in the bracelet and because Gold is so soft the bracelet can get badly mullered and then you're on for a horrific service bill to rebuild the whole thing. (riveting the links is NOT the solution - it just mullers the watch even more and will eventually destroy the bracelet). And replacing the bracelet kills originality AND costs, I think, about £6000.
So bought a vintage full Gold Sub a few weeks ago (with a rather special dial) and found out in the papers that the previous owner had received a service bill from Rolex UK for £4500. Yep, £4500 for a "full Geneva Rebuild."
I have had a Gold Submariner since 1989 when I bought it new. The gold is quite soft and the bracelet will mark and wear. In particular, the rods holding the links together will wear bigger and bigger holes into the links. This tends to happen mostly at the links near to the clasp rather than at the end attached to the case. The links on a gold submariner bracelet are not screwed in but are pressed in using a special tool and to add or remove a link means you need to send the watch to Rolex.
By coincidence I had my Gold Submariner serviced by Rolex late last year and they serviced the watch, replaced the dial which was peeling, refurbished the case etc and replaced two links/rods next to the clasp plus repaired the gold extension fliplock which is also a weak point.
Total cost was just under £1000 so the £4500 service bill some time ago must mean the watch/bracelet was more or less destroyed.
By coincidence I had my Gold Submariner serviced by Rolex late last year and they serviced the watch, replaced the dial which was peeling, refurbished the case etc and replaced two links/rods next to the clasp plus repaired the gold extension fliplock which is also a weak point.
Total cost was just under £1000 so the £4500 service bill some time ago must mean the watch/bracelet was more or less destroyed.
chris56 said:
I have had a Gold Submariner since 1989 when I bought it new. The gold is quite soft and the bracelet will mark and wear. In particular, the rods holding the links together will wear bigger and bigger holes into the links. This tends to happen mostly at the links near to the clasp rather than at the end attached to the case. The links on a gold submariner bracelet are not screwed in but are pressed in using a special tool and to add or remove a link means you need to send the watch to Rolex.
By coincidence I had my Gold Submariner serviced by Rolex late last year and they serviced the watch, replaced the dial which was peeling, refurbished the case etc and replaced two links/rods next to the clasp plus repaired the gold extension fliplock which is also a weak point.
Total cost was just under £1000 so the £4500 service bill some time ago must mean the watch/bracelet was more or less destroyed.
Got it.Interesting.By coincidence I had my Gold Submariner serviced by Rolex late last year and they serviced the watch, replaced the dial which was peeling, refurbished the case etc and replaced two links/rods next to the clasp plus repaired the gold extension fliplock which is also a weak point.
Total cost was just under £1000 so the £4500 service bill some time ago must mean the watch/bracelet was more or less destroyed.
My Gold Sub looks, (except for the dial) and feels like new. The bracelet is really tight which is great (given that I didn't pay for the refurb!).
Question Chris56 - My Sub is the supposedly rare "nipple" dialed version and I can see a little discolouration on the dial. If I were to send it back to Rolex for service(I wouldn't give it to anyone else that's for sure) will they replace my dial/hands with new versions of the same ones that were on the watch back in the day OR will they "update" the dial/hands (which would be a disaster!)?
(FYI: This is the beauty of PP. They will restore ANY watch they've ever made to absolutely original condition and if the parts don't even exist for that model anymore they'll bloody make them so the watch looks exactly the same as the day it left the factory - apparently they're the only watchmaker to do it but you DO pay through the nose I suppose).
Edited by Murcielago_Boy on Friday 5th July 17:01
Unfortunately, if you send it back to Rolex and they notice that the dial is in poor condition then they will suggest replacement. In my experience they will replace your old damaged nipple dial with a new more modern dial. This is exactly what happened to me when I sent my 16800 in for service with damaged peeling maxi dial. The replacement dial was a more modern dial. Watch looks great but has been devalued somewhat by this new dial
Gassing Station | Watches | Top of Page | What's New | My Stuff



