bits 'n' bobs!!!
Discussion
Does everyone else suffer from the damned park switch packing up ever year?? On my second replacement now! So annoying changing the thing too!
Still getting wet in the cab too, even after putting a bead of silicone sealant around the brake reservoir! Any other idea's?
My drivers door seems to protude a fraction more than the passenger door when shut. Can this be changed by simple re-alignment??
And the dammned oil leak from the airbox on the drivers side where the breather pipe joins! So smelly with the windows open!!
Still getting wet in the cab too, even after putting a bead of silicone sealant around the brake reservoir! Any other idea's?
My drivers door seems to protude a fraction more than the passenger door when shut. Can this be changed by simple re-alignment??
And the dammned oil leak from the airbox on the drivers side where the breather pipe joins! So smelly with the windows open!!
jasonben said:
Does everyone else suffer from the damned park switch packing up ever year?? On my second replacement now! So annoying changing the thing too!
Park switch? Assume you are refering to the handbrake microswitch, which illuninates on the dash when in park/ignition on? I found that the 'bent' metal strip, used to determine whether the micro switch was in the on/off position was 'overbent' in my case, and when the handbrake was off, it seemed to be putting too much pressure on the microswitch itself...carefully bent strip a little at a time till just right, and cured my prob
Still getting wet in the cab too, even after putting a bead of silicone sealant around the brake reservoir! Any other idea's?
This could be a multitude of enteries around the bulkhead area...if you do a search using "water/footwells" you should find a list of possible water entry points!...could be any one of them!
My drivers door seems to protude a fraction more than the passenger door when shut. Can this be changed by simple re-alignment??
Some adjustment can be made on the lock mechanism both on the door and B post from what I can see...apoorly shutting door could also be a way that you are getting the water in!
And the dammned oil leak from the airbox on the drivers side where the breather pipe joins! So smelly with the windows open!!
Mastic around joint maybe...a new jubilee clip...some Araldite if its cracked...keeep the windows shut!...sorry cant really comment too much with this one!
>> Edited by satman on Wednesday 13th October 10:20
Gassing Station | Cerbera | Top of Page | What's New | My Stuff



...sorry cant really comment too much with this one!