Centre Console Trim Removal
Discussion
Colin RedGriff said:
They're not obvious just looking in the car. You need to pull the seats forward and look/feel under the tail where it runs across the parcel shelf. There's a bracket on each side of the car. Easy enough to undo the bolts once you found them
Thanks for that Colin. Will have a rummage later. mcosh said:
How big a job would it be to completely remove the centre consol cover? Is it simple plug to disconnect once whale tail is free?
From memory; once you've removed the bolts at the back you need to slacken the handbrake cable (adjuster near the diff) so you can pull the handle pretty much vertical. Unscrew the gearknob and then lift the rear of the console up. This lets is slide out from under the heater control panel and then you can lift it off the gear stick and handbrake lever. That's as fas I got - you would still need to disconnect the door release cables to completely remove it; I just needed to move it out of the way.
Not sure what it takes to remove the bolsters on the tunnel I'm afraid
Gassing Station | Griffith | Top of Page | What's New | My Stuff



