Pushing Bushes Out
Discussion
If it's of any use, I've posted a link to a picture of a home made hydraulic press I used to push the wishbone bushes out.
The 1/4 plate, 100mm square box section was £10, the M24 studding, nuts and washers were £15 and the 4-tonne bottle jack was £15 from Halfords.
Works a treat. One bush was solid and went like a shotgun as it released.
You will need a hole drill to form the holes in the box section. I also drilled an tapped the base of the bottle jack and bolted it to the box section to stop it slipping.
Here is the link: http://screencast.com/t/UqaCVGbwaabr
The 1/4 plate, 100mm square box section was £10, the M24 studding, nuts and washers were £15 and the 4-tonne bottle jack was £15 from Halfords.
Works a treat. One bush was solid and went like a shotgun as it released.
You will need a hole drill to form the holes in the box section. I also drilled an tapped the base of the bottle jack and bolted it to the box section to stop it slipping.
Here is the link: http://screencast.com/t/UqaCVGbwaabr
Gassing Station | Cerbera | Top of Page | What's New | My Stuff