Floppy selector...

[matt-man]

Hey Guys,

A couple of years back changed the bushes on the box, replaced the cradle bushes on the selector and it make it much better but still when it is in gear i get quite a bit of movement and it isnt very precise...

Anyideas?

Are there any LT77 specialists i can speak to about it / have the selector looked at?

Cheers boyos

[Danny Hoffman]

Is the movement up and down or side to side?

[adam quantrill]

Or in and out ;^)

[matt-man]

Hey guys, all the movement is side to side, all up and down went with the cradle bushes....

[TVR_Tuscan]

adam quantrill said:

Or in and out ;^)

Adam, Adam...

[mrzigazaga]

My gearstick is like a teaspoon in a bucket of porridge when its in gear and it was pointed out to me at the fest that its more likely to be the nylon bush/cap at the bottom of the gearstick..Not sure if its the same with yours though...Ziga

[adam quantrill]

TVR_Tuscan said:

adam quantrill said:

Or in and out ;^)

Adam, Adam...

They don't call it a "layshaft" for nothing, y'know!!!

[matt-man]

Found it! The play appears to come from a won bush between the linkage and the selector shaft outside the box...lads of movement!

It's tight but bush must be toast