clock problem.. works then stops..

[MADMAX2]

the clock in the dash (silver alloy bezel type white dial) stopped for some reason the connections are fine behind the dash got 12v.. so all seemed good set the time again watched it for a few minutes all ok left it over night and the clock worked for an hour or so then stopped.. checked connections again and 12v again set the clock which was 8.40 last night got up this morning and it said 10.55???

is the little black adjuster sticking? i can see 2 screws in the back of the clock does it come apart to spray a little wd40? or is it just fubar?


any ideas apart from ive been thru a time warp

[2 sMoKiN bArReLs]

MADMAX2 said:

t got up this morning and it said 10.55???

Well, it's midday now, so I suspect it's your other clocks that are wrong.

(and you are late for work)

[Bassfiend229hp]

If you leave it as it is then at least it'll be accurate twice a day...

[Sardonicus]

MADMAX2 said:

the clock in the dash (silver alloy bezel type white dial) stopped for some reason the connections are fine behind the dash got 12v.. so all seemed good set the time again watched it for a few minutes all ok left it over night and the clock worked for an hour or so then stopped.. checked connections again and 12v again set the clock which was 8.40 last night got up this morning and it said 10.55???

is the little black adjuster sticking? i can see 2 screws in the back of the clock does it come apart to spray a little wd40? or is it just fubar?


any ideas apart from ive been thru a time warp

No help at all I know but this is the only thing on my car that as never worked correctly since purchased it loses about 4 hours a day its stayed consistent ill give it that

[FlipFlopGriff]

Buy a watch.
FFG

[Pupp]

Count yourself lucky; mine regularly runs backwards

[Chilliman]

Mine loses about three and a half seconds every time I boot it from 0-60 On the face of it that's not bad

[K4TRV]

Mine "was" the the most reliable thing on my Chim over 10-years ownership - one or two secs a Year!!!

Sold it last month........

The Tamora digital clock isn't just the same!!!

Trev

edited for spalling

Edited by K4TRV on Friday 19th July 14:18

[MADMAX2]

6 hours later it's still working

[MADMAX2]

7 hours later it's still working

Edited by MADMAX2 on Friday 19th July 15:10

[K4TRV]

how many clocks do you have....?

[Sardonicus]

K4TRV said:

how many clocks do you have....?

[SILICONEKID343HP]

MADMAX2 said:

6 hours later it's still working

Thought you were fitting a Turbo the your car MADMAX ! You will need that whole for a boost gauge or something

[MADMAX2]

SILICONEKID343HP said:

MADMAX2 said:

6 hours later it's still working

Thought you were fitting a Turbo the your car MADMAX ! You will need that whole for a boost gauge or something

yes but not now.... anyway the clock is still working