How should I clean the back of my watch?
How should I clean the back of my watch?
Author
Discussion

Tom_C76

Original Poster:

1,923 posts

219 months

Friday 19th July 2013
quotequote all
I've got a TAG Carrera Calibre Chrono, the one with a portrait of Fangio engraved on the case back. It's my daily wear as I'm not in the market for multiple expensive watches, but particularly in this heat the back of the case is starting to pong a bit, probably due to the depth of the engraving.

What would be the best way to clean it? I'm thinking maybe cotton buds and surgical spirit, but I'm open to any better suggestions.

TC

Shaw Tarse

31,904 posts

234 months

Friday 19th July 2013
quotequote all
Is it waterproof?

GingerWizard

4,721 posts

229 months

Friday 19th July 2013
quotequote all
toothpaste and an old brush.

Riff Raff

5,462 posts

226 months

Friday 19th July 2013
quotequote all
I use spectacle cleaner spray on mine, wiped off with a microfibre cloth, after giving them a rinse under the tap with a smidge of fairy liquid.

But as SA indicated, you might not like the result depending on how waterproof the case is.

If you have a leather strap, that might be the bit that is producing the pong. Bracelets also get fairly manky, but unlike leather, they can be washed.

Tom_C76

Original Poster:

1,923 posts

219 months

Friday 19th July 2013
quotequote all
It's a bracelet watch and waterproof to 100m so fine to wash. It's definitely the back of the watch itself that smells, probably where the picture engraving forms a slot 2mm wide and about the same depth with a rough base.


PJ S

10,842 posts

258 months

Friday 19th July 2013
quotequote all
Soap and water is all you need with a soft (child's) toothbrush.
Do not put alcohol near it, it'll damage the seals over time.

You could throw money at dedicated products like:
http://www.minus4plus6.com/cool.htm
http://www.watchobsession.co.uk/HELI-CLeaning
http://www.watchgecko.com/catalog/index.php?manufa...

ecain63

10,653 posts

206 months

Saturday 20th July 2013
quotequote all
PJ S said:
Soap and water is all you need with a soft (child's) toothbrush.
Do not put alcohol near it, it'll damage the seals over time.

You could throw money at dedicated products like:
http://www.minus4plus6.com/cool.htm
http://www.watchobsession.co.uk/HELI-CLeaning
http://www.watchgecko.com/catalog/index.php?manufa...
This.

Soft toothbrush and some fairy liquid in warm water. Thats all we use at work when cleaning them. Dont use an ultrasonic.

huwp

833 posts

206 months

Saturday 20th July 2013
quotequote all
ecain63 said:
This.

Soft toothbrush and some fairy liquid in warm water. Thats all we use at work when cleaning them. Dont use an ultrasonic.
Washing up liquid has salt in it. For me I use just soap and water. I agree about the ultrasonic.





ecain63

10,653 posts

206 months

Saturday 20th July 2013
quotequote all
Fair enoughski. Never had an item rust as a result though. Always rinsed in fresh water afterward.

CardShark

4,264 posts

210 months

Saturday 20th July 2013
quotequote all
I've always used shower gel or shampoo with an old toothbrush, does the job grand.

Riff Raff

5,462 posts

226 months

Saturday 20th July 2013
quotequote all
huwp said:
ecain63 said:
This.

Soft toothbrush and some fairy liquid in warm water. Thats all we use at work when cleaning them. Dont use an ultrasonic.
Washing up liquid has salt in it. For me I use just soap and water. I agree about the ultrasonic.
I can't see what the problem with salt is. First, you are rinsing off the fairy with water leaving no residue. Second, in this case the watch is stainless - a bit of salt on that will have no effect. Third, and this is the most important point, Human Beings are in effect a big bag full of salty water. It leaks out when we sweat. So your watch is exposed to a salty environment whenever you wear it.

Using fairy is not going to damage anything.

PJ S

10,842 posts

258 months

Saturday 20th July 2013
quotequote all
ecain63 said:
Fair enoughski. Never had an item rust as a result though. Always rinsed in fresh water afterward.
That's the key with using washing up liquid, only a small amount is required, and a thorough rinse.
As Riff Raff says, sweat is saline, so it's always going to be exposed to some level of saltiness.