Opening a plastic-cased watch
Opening a plastic-cased watch
Author
Discussion

CAPP0

Original Poster:

20,881 posts

234 months

Saturday 20th July 2013
quotequote all
MrsC has a "Wave" watch which she quite likes, but the battery needs replacing. The case on these is plastic (hard plastic) with a metal back, with notches to open it. I do have a proper 3-legged case opener, albeit a fairly cheap one, but try as I might I cannot get the back to turn. I've also tried the "ball of gaffer tape" trick but to no avail. I think that because the plastic is so dry, the metal sticks against it.

I guess that the case back will have at least a rudimentary seal, so lubricant isn't going to get anywhere? Can anyone suggest a way of getting this open?


bry1975

1,246 posts

194 months

Saturday 20th July 2013
quotequote all
A pic of the problem would help LOTS Squire.

CAPP0

Original Poster:

20,881 posts

234 months

Saturday 20th July 2013
quotequote all
Will do when I'm home again in a bit!

ecain63

10,653 posts

206 months

Saturday 20th July 2013
quotequote all
The thing with plastic is that if you press hard on the case back the threads stick. You just need to be gentle. The weather doesnt help either so maybe stick it in the fridge for an hour to stiffen up the plastic thread.

CAPP0

Original Poster:

20,881 posts

234 months

Sunday 21st July 2013
quotequote all
Pic as requested, and yes, that scratch was me trying to get it off redface I'll try the fridge trick, I've opened other cases beore with no problem, I'm sure it's just the metal back sticking to the plastic case.


bry1975

1,246 posts

194 months

Sunday 21st July 2013
quotequote all
Sticking as in Galling?

Should've borrowed one of my non marking case tools>>


CAPP0

Original Poster:

20,881 posts

234 months

Monday 22nd July 2013
quotequote all
Yes, I think galling is probably the term. Tried the fridge thing overnight with no luck. Might have to take it in somewhere and see if they can uncrack it - annoying!

Hoofy

80,170 posts

313 months

Monday 22nd July 2013
quotequote all
You probably need to clamp it down and then apply a lot of pressure on the tool to keep it in place and then twist until you burst something in your neck.

clockworks

7,813 posts

176 months

Monday 22nd July 2013
quotequote all
Are you sure it really is a screw case back?

CAPP0

Original Poster:

20,881 posts

234 months

Monday 22nd July 2013
quotequote all
To be fair, I assumed it was given the notches - but even if it was a pop-off (?) version then the case opening tool would at least have turned it I would have thought?

bry1975

1,246 posts

194 months

Monday 22nd July 2013
quotequote all
Send it to a guy with a Bergeon 5700Z.


CAPP0

Original Poster:

20,881 posts

234 months

Monday 22nd July 2013
quotequote all
It might end up like that! Any idea how I find one?

bry1975

1,246 posts

194 months

Monday 22nd July 2013
quotequote all
Or this method recommended at NAWCC>>



"Using a hot glue gun, squirt a moderate amount of hot glue onto the caseback. Then, stick the case, glue side down, onto a piece of glass. I used to use an old glass plate from the kitchen but now I use an old glass paperweight. Wait ten minutes, then unscrew. For wristwatches, I usually put the case in a case holder and use that for extra torque."

Cappo,

Speak to James Hyman hes got one THEY'RE very useful sadly sold mine.
jameshyman10 AT outlook DOT com

Edited by bry1975 on Monday 22 July 21:45

CAPP0

Original Poster:

20,881 posts

234 months

Monday 22nd July 2013
quotequote all
Thanks Bry - and not least for the fact that I can now justify buying myself a glue gun! (Presumably it peels off after...)

bry1975

1,246 posts

194 months

Tuesday 23rd July 2013
quotequote all
Nail varnish remover (acetone) or vinegar should soften the glue if needed.

CAPP0

Original Poster:

20,881 posts

234 months

Monday 12th August 2013
quotequote all
Well, all attempts, including the glue gun, have now failed so I have dropped James a line!

CAPP0

Original Poster:

20,881 posts

234 months

Monday 12th August 2013
quotequote all
NeMiSiS said:
clockworks said:
Are you sure it really is a screw case back?
This^^^^^^^^^^^^

Some case rears look like screw downs, but they have a small lip for your knife and are in-fact press fit/pop offs.
Well b*gger me. As above, I had (a) assumed* that it was screw because of the notches, and (b) assumed that an opening tool would turn it anyway, but I just had a close look at the case under a loup and found a very small tab near one of the strap lugs - put an opening knife under it and it has opened!

So, thanks very much and apologies to clockworks for not having checked that the first time. James offered to open it for me so I'll drop him a line back to confess my ignorance and success!



* "Assumption is the mother of all f*** ups" - Steven Seagal, I believe!

Edited by CAPP0 on Monday 12th August 10:41

Hoofy

80,170 posts

313 months

Monday 12th August 2013
quotequote all
WTF. Not your fault really. Why on earth would you put those indentations if it's a push case back?!