3000m door trim
Discussion
Does anyone have a good condition set of door trims for a 3000m in oatmeal (tan)I only really need the diver side outer trim as the rest is OK I have tried getting the vinyl to recover but cant seem to find anything that matches and it would be a shame to have redo all the interior for the sake of one scruffy door trim.
I have tried getting in touch with Adrian but not sure if he is away at the moment
Cheers Chris
I have tried getting in touch with Adrian but not sure if he is away at the moment
Cheers Chris
I bought vinyl from Woolies when I recovered my door trims a couple of years ago.
I was concerned about colour match, so took a piece of my original Oatmeal ish, it didnt quite match their new vinyl, but had the same ref number printed on back (302 I think).
2 years on, new vinyl has blended in well.
I used their 1/2" thick scrim foam between door card & vinyl.
Lots of clothes pegs were useful when gluing the vinyl.
MikeS
I was concerned about colour match, so took a piece of my original Oatmeal ish, it didnt quite match their new vinyl, but had the same ref number printed on back (302 I think).
2 years on, new vinyl has blended in well.
I used their 1/2" thick scrim foam between door card & vinyl.
Lots of clothes pegs were useful when gluing the vinyl.
MikeS
baldies said:
I bought vinyl from Woolies when I recovered my door trims a couple of years ago.
I was concerned about colour match, so took a piece of my original Oatmeal ish, it didnt quite match their new vinyl, but had the same ref number printed on back (302 I think).
2 years on, new vinyl has blended in well.
I used their 1/2" thick scrim foam between door card & vinyl.
Lots of clothes pegs were useful when gluing the vinyl.
MikeS
Thanks mike will give them a call if I cant get hold of oneI was concerned about colour match, so took a piece of my original Oatmeal ish, it didnt quite match their new vinyl, but had the same ref number printed on back (302 I think).
2 years on, new vinyl has blended in well.
I used their 1/2" thick scrim foam between door card & vinyl.
Lots of clothes pegs were useful when gluing the vinyl.
MikeS
Chris
Gassing Station | TVR Classics | Top of Page | What's New | My Stuff


