Tamora / T350 injector spec

[Ant.]

Does anyone have or know the spec of the standard injectors fitted to the 3.6 in the Tamora or T350??

Cheers

[Ant.]

Anybody ???

[Quentin1]

Manufacturer is Sagem, sorry, but no number available. TVR number is E3427 for the 3.6 and 4.0 Standard cars, E4422 for Tuscan S and Sagaris.
Technical data is
-Impedence 15.9 Ohms
-Static flow rate 200 grams per Minute
-Dynamic flow rate 6 mgrams per pulse 4,5% @ 14 Volts @ 100 hertz
The Information is from TVR Engineering Blackpool.

For any strange reason the original part number is removed from any injector I have seen. There must be a Standard replacement available.

Björn.

[K4TRV]

Quentin1 said:

Manufacturer is Sagem, sorry, but no number available. TVR number is E3427 for the 3.6 and 4.0 Standard cars, E4422 for Tuscan S and Sagaris.
Technical data is
-Impedence 15.9 Ohms
-Static flow rate 200 grams per Minute
-Dynamic flow rate 6 mgrams per pulse 4,5% @ 14 Volts @ 100 hertz
The Information is from TVR Engineering Blackpool.

For any strange reason the original part number is removed from any injector I have seen. There must be a Standard replacement available.

Björn.

Hmmm, curiouser and curiouser......??

Racing Green's & Clever Trevor's description and the part number for a T350/Tamora is: E6422

The injector quoted for for a Sagaris/Tuscan S or cerbera 4.5 is: E3427

So where does that leave us??

[Quentin1]

That i made a mistake...
your part numbers are correct, there was a tipo anyway...sorry.

[K4TRV]

Quentin1 said:

That i made a mistake...
your part numbers are correct, there was a tipo anyway...sorry.

Good man, that's cleared that up, for me!

[Ant.]

Thanks for the info !!!
Got mine out now and they just the e6422 number and also 1892 and 01D004D.

[hardtailer]

i can confirm E6422 and the 01Dxxx numberand add the fact rear these have a double cone spray pattern.
i read in another post that the standard objectors would be single cone and that only the tuscan s and sagaris would have the double cone bit its not the case on the objectors in my engine, which is supposed to be 'special' judging from the build sheet. it has tuscan s cats and big bore exhaus.

[Ant.]

hardtailer said:

i can confirm E6422 and the 01Dxxx numberand add the fact rear these have a double cone spray pattern.
i read in another post that the standard objectors would be single cone and that only the tuscan s and sagaris would have the double cone bit its not the case on the objectors in my engine, which is supposed to be 'special' judging from the build sheet. it has tuscan s cats and big bore exhaus.

OK thats interesting, so why would mine have them fitted?

[hardtailer]

blyme Samsung word recognition doesn't always work as it seems in my earlier post...

Ant, hard to tell really. maybe tvr put e6422 into 3.6l engines too?!

Edited by hardtailer on Thursday 1st August 22:46

[Mattt]

Ant. said:

OK thats interesting, so why would mine have them fitted?

The TVR build method generally consisted of "What do we have lying around at the moment?"