More time wasted in mappin and Webb T5
More time wasted in mappin and Webb T5
Author
Discussion

Nattyboy888

Original Poster:

260 posts

188 months

Monday 29th July 2013
quotequote all
Don't know why I do it to myself - just tried this on - absolutely lovely - reminded me of the JLC master compressor range a bit that I nearly pulled the trigger on in April. Similar price - but this would appear to be much better VFM. Will be watching to see how they drop in the used market ..

chris56

1,410 posts

210 months

Monday 29th July 2013
quotequote all
I bought one (new) from a Zenith dealer - it was broken (the date changing mechanism needs to be set only at certain times) and if you do not follow the instructions it breaks. Mine was broken when the sales assistant set it in the shop.
It then would not change date - returned the watch and insisted on a refund as I had no confidence in it not happening again. Lovely watch but I would be very wary of a watch which breaks so easily.

bry1975

1,246 posts

194 months

Monday 29th July 2013
quotequote all
Thats terrible ZENITH use to supply Rolex HAVE you complained to Zenith surely they must know?

sparkyhx

4,200 posts

235 months

Monday 29th July 2013
quotequote all
chris56 said:
I bought one (new) from a Zenith dealer - it was broken (the date changing mechanism needs to be set only at certain times) and if you do not follow the instructions it breaks. Mine was broken when the sales assistant set it in the shop.
It then would not change date - returned the watch and insisted on a refund as I had no confidence in it not happening again. Lovely watch but I would be very wary of a watch which breaks so easily.
most mechanicals are like that. Your not supposed to set the date during its 'turnover phase' as you can damage them.


SVS

3,824 posts

302 months

Monday 29th July 2013
quotequote all
sparkyhx said:
most mechanicals are like that. Your not supposed to set the date during its 'turnover phase' as you can damage them.
Interesting. Any other easy ways to break an automatic (other than the obvious, that is)?

Nattyboy888

Original Poster:

260 posts

188 months

Monday 29th July 2013
quotequote all
Yes mine are sensitive to that - you can normally feel the resistance at certain times.

bry1975

1,246 posts

194 months

Monday 29th July 2013
quotequote all
Yup mostly likely strip the soft brass(some plastic) datewheel teeth or dislodge a cog etc.

Riff Raff

5,462 posts

226 months

Tuesday 30th July 2013
quotequote all
chris56 said:
I bought one (new) from a Zenith dealer - it was broken (the date changing mechanism needs to be set only at certain times) and if you do not follow the instructions it breaks. Mine was broken when the sales assistant set it in the shop.
It then would not change date - returned the watch and insisted on a refund as I had no confidence in it not happening again. Lovely watch but I would be very wary of a watch which breaks so easily.
Most watches that have two timezone functionality aren't all that fussy about when you set the date - if they were, you wouldn't be able to change between timezones on the fly, which would defeat the object of having a two timezone timepiece.

On all of the GMT watches I've had, the hour hand that you are setting jumps in 1 hour intervals, so you just keep on advancing the hour until the date changes. Or retarding the hour until the date changes backwards.

It should be pretty much impossible to bust the date change function - I can't think how you would do it. (On a GMT watch).

chris56

1,410 posts

210 months

Tuesday 30th July 2013
quotequote all
sparkyhx said:
most mechanicals are like that. Your not supposed to set the date during its 'turnover phase' as you can damage them.
Agreed but on this particular watch the restrictions are very unusual and restrictive. In essence, both the hour hand and the minute have to be in the lower half of the dial for you to change the date. i.e. no where near the changeover phase. The sales assistant who adjusted the time was well aware that you should not adjust the date when it is in its changeover phase but was not aware of this restriction.
Result one broken Zenith Doublematic.

chris56

1,410 posts

210 months

Tuesday 30th July 2013
quotequote all
Riff Raff said:
Most watches that have two timezone functionality aren't all that fussy about when you set the date - if they were, you wouldn't be able to change between timezones on the fly, which would defeat the object of having a two timezone timepiece.

On all of the GMT watches I've had, the hour hand that you are setting jumps in 1 hour intervals, so you just keep on advancing the hour until the date changes. Or retarding the hour until the date changes backwards.

It should be pretty much impossible to bust the date change function - I can't think how you would do it. (On a GMT watch).
The date mechanism on the Zenith is a double digit with each digit separate. You adjust the date by pulling the crown out to the date setting position not by altering the GMT hour hand. As I detailed in my previous post if you adjust the date whilst either the hour hand or minute hand or both are in the top half of the dial then you will most probably break the date change mechanism and it has to go back to Zenith.

Riff Raff

5,462 posts

226 months

Tuesday 30th July 2013
quotequote all
chris56 said:
Riff Raff said:
Most watches that have two timezone functionality aren't all that fussy about when you set the date - if they were, you wouldn't be able to change between timezones on the fly, which would defeat the object of having a two timezone timepiece.

On all of the GMT watches I've had, the hour hand that you are setting jumps in 1 hour intervals, so you just keep on advancing the hour until the date changes. Or retarding the hour until the date changes backwards.

It should be pretty much impossible to bust the date change function - I can't think how you would do it. (On a GMT watch).
The date mechanism on the Zenith is a double digit with each digit separate. You adjust the date by pulling the crown out to the date setting position not by altering the GMT hour hand. As I detailed in my previous post if you adjust the date whilst either the hour hand or minute hand or both are in the top half of the dial then you will most probably break the date change mechanism and it has to go back to Zenith.
Fair enough. It does make it pretty useless as a two timezone watch though.

On any of mine, Rolex, JLC, if I go for example from London to New York, I just set the hour hand back five hours. If it's gone past midnight, the date goes back too. Other way coming home.

I would find manually adjusting the date across time zones right pain in the 'arris.

hilly10

7,543 posts

259 months

Tuesday 30th July 2013
quotequote all
On my Breitling Chrono and some others I have had it states to only change the date with both hands between the 4 and the 8

westberks

1,463 posts

166 months

Tuesday 30th July 2013
quotequote all
managed to break an IWC doing exactly the same thing; was due a service though anyway rolleyes

hungry_hog

2,920 posts

219 months

Tuesday 30th July 2013
quotequote all
When I took my Broad Arrow for a service the chap at Omega said the date should not be adjusted between 11pm and 1am, so this is normal I think

RumbleOfThunder

3,728 posts

234 months

Wednesday 31st July 2013
quotequote all
I've managed to this twice on a Seiko and Longines. Got away with it thankfully.

westberks

1,463 posts

166 months

Wednesday 31st July 2013
quotequote all
also did it on a Breitling Superocean too (forgot about that one!)

don't bother changing the dates anymore; proving too expensive.