Body Refitting

[blues3]

Has anyone put together a body refit checklist?

I.E.

1. Ensure brake pipes are finished and secure
2. Complete handbrake cables
3. Fit fuel tank but leave loose
4. Fit chassis pads, not forgetting the small ones over the central tubular section
5. Fit clutch pipe and secure
6. etc......

[magpies]

come on peeps ....need more info as putting body on chassis in 10 days.

where on the central chassis do the rubber pads go and what thickness?

[blues3]

The pads on the central spine can be seen between the two red lines, with the 3 tie wraps....

http://tvrs3.net/Handbrake/Handbrake%20Layout.html

[magpies]

I wonder if that is to protect the chassis from the handbrake cable as the rubber is on the inside and the body would be on the outside of that tube