It broke so i may aswell upgrade!

[Brummmie]

My slave cylinder cried enough, so rather than do a like for like, i like to continue my "if it breaks improve it" philosophy
I have a Monster stage 3 clutch to go in, around 2 thirds of the weight of the original set up and 700lbs/ft capacity, the owner of Monster says it will still drive nicely, should sharpen up gear changes with less mass acting on the syncro's....

[rigga]

Couldn't you get it in red to match the car .....

[Cerbieherts]

That's a beefy looking bit of kit! Will be interested in hearing your impressions once it's fitted..

[neal1980]

does this mean some more power then now to make use of the new 700lbft rating

[ajp70]

In the beginning, I thought I was in the same league as you Paul. Since then I have watched the developments of your car with admiration and a hint of jealousy. This is one more step towards your dream car and what I dream of (I have no spare cash anymore).

I'll look forward to the next time I see it in action as it is one of the famous TVRs.

[Brummmie]

Got the gearbox out tonight, I hope to be driving it tomorrow, there's a break in period of around 500mls,
Will get to a run what ya brung after and see if there is a tenth or two in it

[Brummmie]

Well i got the clutch in, and vibrates like a road drill...
So its coming back out to balance it...FFS

[Alexdaredevils]

Since reading this I pulled my engine back out and sent the clutch/flywheel off to get balanced after reading some more horror story's

Turns out it was almost perfect, oh well rather do it now than when it's all built up

[Alexdaredevils]

Mines good for. 758ftlbs!

[neal1980]

Alexdaredevils said:

Mines good for. 758ftlbs!

Mine can do 950ftlb's

[db484bhpv8]

Brummmie said:

Will get to a run what ya brung after and see if there is a tenth or two in it

FFS Paul. You will be running 9's before i get into the 10's

I just hope mine stays in 1 piece this weekend