Omega losing time - is this normal?
Omega losing time - is this normal?
Author
Discussion

matt3001

Original Poster:

1,999 posts

228 months

Friday 9th August 2013
quotequote all
I have had a Omega Seamaster, I don't really know the official name of it. Other than it has a white face with blue dials, 150m, crysal back.

Anyway, recently its started losing a fair old chunk of time, easily 5 mins a week, maybe 6 mins.

I have had the watch about 8 years and its never been serviced (bad I know). Is this the reason for it losing so much time?

What is the cost of a service likely to rush me?

yeti

10,704 posts

306 months

Friday 9th August 2013
quotequote all
Short answer is yes, it probably needs a service. I assume it's a mechanical (automatic) watch?

Send it to Omega (via a jeweller/dealer) and it'll cost about 400 I suppose. An independent may do it for more like 200 though.

Lorneg

228 posts

210 months

Friday 9th August 2013
quotequote all
8 years is about the maximum between re-oiling for any of the ETA movements - which are fitted in Omega's. What's happened is that the oil reservoirs in the jewels have run dry and your watch therefore has more internal friction to deal with. Running slow is the classic symptom.

Re-oiling from Omega is expensive, but if you search for Omega specialists you should find one able to do it for about £50, which for a couple of hours work is what it should cost.

mikeveal

5,141 posts

281 months

Friday 9th August 2013
quotequote all
Yes, sound like it needs a service. Oil has probably dried out in the bearings, causing friction. Service sooner rather than later.

The independant I use charges £65 for servicing a manual / auto with no complications.

matt3001

Original Poster:

1,999 posts

228 months

Friday 9th August 2013
quotequote all
I am London / SE based. Happy to accept PMs of recommendations of decent Indy's

matt3001

Original Poster:

1,999 posts

228 months

Friday 9th August 2013
quotequote all
And yes - automatic.

Found a picture of what I have.


mikeveal

5,141 posts

281 months

Friday 9th August 2013
quotequote all
On the other hand, its probably got a faulty whurlyfettle, not worth more than its scrap value now I'm afraid.

As it happens, I have a working whurlyfettle, so (and this is only because you're a PHer) I'll do you a favour and take it off your hands for a tenner.


You should stop wearing it immediately and get it in the post. Could explode at any moment you know. Think: and you won't be far off.

Seriously, get in the post to me ASAP.

Tanguero

4,535 posts

232 months

Friday 9th August 2013
quotequote all
Lorneg said:
8 years is about the maximum between re-oiling for any of the ETA movements - which are fitted in Omega's. What's happened is that the oil reservoirs in the jewels have run dry and your watch therefore has more internal friction to deal with. Running slow is the classic symptom.

Re-oiling from Omega is expensive, but if you search for Omega specialists you should find one able to do it for about £50, which for a couple of hours work is what it should cost.
The usual symptom of needing re-oiling is running fast. As the friction increases, the balance wheel amplitude reduces which cause fast running. Increased friction in the driven train means that the balance wheel receives a smaller impulse which compounds the problem.

Agreed the watch needs servicing, but it is not likely to be running slow due to increased oil viscosity.


ETA: And re oiling a watch is nothing like a couple of hours work! You have to completely dismantle, clean and reassemble it in order to re-oil it.
Edited by Tanguero on Friday 9th August 22:55


Edited by Tanguero on Saturday 10th August 15:23

Podie

46,649 posts

306 months

Friday 9th August 2013
quotequote all
matt3001 said:
I am London / SE based. Happy to accept PMs of recommendations of decent Indy's
Dominic H sorts all my watches. Drop him a line.

Psychobert

6,318 posts

287 months

Saturday 10th August 2013
quotequote all
What's the normal range of accuracy for a seamaster pro? Mine came back from a service in Dubai with a misfitted bezel but also regularly losing 6 seconds a day. I took it into an Omega centre as it was well past needing a service and I wasn't sure how long before I'd be back in the uk.. Not very impressed so far..

Podie said:
Dominic H sorts all my watches. Drop him a line.
Second that, top chap. Hhaving finally met him and done a great deal, he's my first call for anything watch related..

PJ S

10,842 posts

258 months

Saturday 10th August 2013
quotequote all
They should meet COSC specs, −4 to +6 secs per day, but if it's consistently losing or gaining time every day, then the regulation needs adjusting, even if after a week it's 28 secs slow or 42 secs fast.
Technically it's in spec, but you'd like to think there's a bit of balancing out done through movement and watch position overnight (presuming you take it off).

clockworks

7,813 posts

176 months

Saturday 10th August 2013
quotequote all
Agree with tanguero - watches generally run fast if they just need a service, and a proper job will take more than a couple of hours.

Has the watch been dropped? - maybe the balance spring has jumped out of the regulator pins.
Slipping cannon pinion is another possibility - may slip each time the date changes.

Really needs to be checked on a timing machine, then serviced or repaired as appropriate.

RichB

56,474 posts

315 months

Saturday 10th August 2013
quotequote all
I would recommend Ryte time watches http://www.rytetimewatchrepairs.co.uk/ he serviced my Omega and it's excellent, cost about £160 - mail service but very reliable and used by several people on P'Heads. biggrin

northandy

3,540 posts

252 months

Saturday 10th August 2013
quotequote all
matt3001 said:
And yes - automatic.

Found a picture of what I have.

Cant comment on the losing time, but thats a lovely watch!