Could you run a Maserati 3200GT on a shoestring budget?
Discussion
I bet everyone is saying emphatically NO...
I was watching Strippers Cars For Cash recently. They bought a lovely looking Maserati 3200GT for 5k. The headgasket was gone. That's loads of car for the money. Runners can be had for 8k.
I do all my own work on my cars and i'm not overly fussy about little things. This is theory at the moment as i'm not in the position to buy. If I was to pick up a bit of a dog 3200GT, (there is one on ebay that's a good example, no history and running problems) something that will never be a good example and i'd treat it as such. I wouldn't be hung up with keeping it original and i'd never go near a Maserati dealer for anything.
I've read lots of horror story's of expensive bills and huge running costs but i'm thinking there are cheap ways around most of the things. (crank end float is one that'd worry me)
I'd be interested to hear off other previous owners what big bills they got lumbered with.
I was watching Strippers Cars For Cash recently. They bought a lovely looking Maserati 3200GT for 5k. The headgasket was gone. That's loads of car for the money. Runners can be had for 8k.
I do all my own work on my cars and i'm not overly fussy about little things. This is theory at the moment as i'm not in the position to buy. If I was to pick up a bit of a dog 3200GT, (there is one on ebay that's a good example, no history and running problems) something that will never be a good example and i'd treat it as such. I wouldn't be hung up with keeping it original and i'd never go near a Maserati dealer for anything.
I've read lots of horror story's of expensive bills and huge running costs but i'm thinking there are cheap ways around most of the things. (crank end float is one that'd worry me)
I'd be interested to hear off other previous owners what big bills they got lumbered with.
no effort said:
I did look into getting an 4200.
To reduce part costs you will need to make a list of all the alternate part numbers used by Alfa and the like.
An example why some bills are so high;
A wheel bearing means a whole new hub.
A major service at an indie is £1000+
Fiat tractors, as well. Some clutch parts are interchangeable...To reduce part costs you will need to make a list of all the alternate part numbers used by Alfa and the like.
An example why some bills are so high;
A wheel bearing means a whole new hub.
A major service at an indie is £1000+
I don't know what shoestring budget is really. I'm thinking comparable to M3 running costs. Basically I wouldn't be looking to spend more than 1-1.5k doing any one job on one (as i'd break it to get my money back).
I'd be different to 90% of Maserati owners, i'd do my own work. I've heard a clutch is a 2k job, it's not if you take it out yourself and get it re-lined, probably cost £100. The throttle body is expensive to repair and you can go contactless for £600 - i've fitted a similar kit on a Volvo that cost about £60, I bet it can be made to work. Someone on this thread says the wheel bearing comes in the hub and is 1k - take the hub off, press the bearing out, find the part number/measure it up and order one from a bearing specialist.
All servicing, including belts and chains would be done myself. (getting hold timing tools may be an issue?!)
Other than the crank end float i've not heard of any issues that'd make me think about breaking it for parts.
I wouldn't be interested in a 4200, you can't get them sub 8k and I want the turbos
I'd be different to 90% of Maserati owners, i'd do my own work. I've heard a clutch is a 2k job, it's not if you take it out yourself and get it re-lined, probably cost £100. The throttle body is expensive to repair and you can go contactless for £600 - i've fitted a similar kit on a Volvo that cost about £60, I bet it can be made to work. Someone on this thread says the wheel bearing comes in the hub and is 1k - take the hub off, press the bearing out, find the part number/measure it up and order one from a bearing specialist.
All servicing, including belts and chains would be done myself. (getting hold timing tools may be an issue?!)
Other than the crank end float i've not heard of any issues that'd make me think about breaking it for parts.
I wouldn't be interested in a 4200, you can't get them sub 8k and I want the turbos

Edited by Escy on Saturday 10th August 13:41
I'm interested to see what this one will fetch http://www.ebay.co.uk/itm/2000-MASERATI-3200-GT-AU...
i admire your attitude.
there is usualy a way round most problems if your willing to get dirty and think outside the box.
its a gamble but that black one looks in reasonable nick other than the engine issue and if it pays off you've got those lovely boomerang rear lights!
there is usualy a way round most problems if your willing to get dirty and think outside the box.
its a gamble but that black one looks in reasonable nick other than the engine issue and if it pays off you've got those lovely boomerang rear lights!
Edited by dudleybloke on Saturday 10th August 15:42
On the 3200 I would say no, they have some pretty worrying problems that could occur and these aren't a motorfactor away (e.g. end float issues, turbo failures e.t.c)
The 3200 has the benefit of being a little older which means some things like Air/Oil filters are getting out of their 'exclusivity' period to Maserati.
The 4200 is a far more reliable choice and much easier to keep running for less money imo
The 3200 has the benefit of being a little older which means some things like Air/Oil filters are getting out of their 'exclusivity' period to Maserati.
The 4200 is a far more reliable choice and much easier to keep running for less money imo
It wouldn't be a daily driver, it'd be a 2nd car as fixing things on the cheap usually takes lots of time, sending things off to be re-built, etc.
I wouldn't consider a 4200, purchase price is >10k. I'd be looking to buy a dog of a 3200 needing work, something with a turbo or head gasket gone. I'm thinking something 5-6k. At that initial outlay, worse case scenario, i'd break it for parts to get my money back. The only thing that would worry me is crankshaft end float.
I probably wouldn't do the mileage to worry about any reliability that much anyway, maybe 5k a year.
I do think i'd be keen to tune it, I think there is easy gains to be had. Apparently the engine timing from the factory is wrong, when timed correctly you can make 20-30bhp more. Might see if I can up the boost a bit.
I wouldn't consider a 4200, purchase price is >10k. I'd be looking to buy a dog of a 3200 needing work, something with a turbo or head gasket gone. I'm thinking something 5-6k. At that initial outlay, worse case scenario, i'd break it for parts to get my money back. The only thing that would worry me is crankshaft end float.
I probably wouldn't do the mileage to worry about any reliability that much anyway, maybe 5k a year.
I do think i'd be keen to tune it, I think there is easy gains to be had. Apparently the engine timing from the factory is wrong, when timed correctly you can make 20-30bhp more. Might see if I can up the boost a bit.
Escy said:
(crank end float is one that'd worry me)
Escy said:
Other than the crank end float i've not heard of any issues that'd make me think about breaking it for parts.
Escy said:
The only thing that would worry me is crankshaft end float.
I understand there is an issue with crank end float, just thought I'd mention (in case you aren't aware of it) 
As someone said, it depends what you mean by 'shoestring budget' - ANY parts, even exhaust/tyres etc. - will not be most people's idea of 'shoestring'.
If what you're saying is "can I buy one and bodge/shed it" then the answer is "yes" but how LONG you'll be able to do that - erm...
£8K is quite a lot just to lose - but if you shed it, resale will be quite hard so you have to consider half of that money as lost the day you buy it - and that's enough to buy and run some quite nice cars in itself.
If what you're saying is "can I buy one and bodge/shed it" then the answer is "yes" but how LONG you'll be able to do that - erm...
£8K is quite a lot just to lose - but if you shed it, resale will be quite hard so you have to consider half of that money as lost the day you buy it - and that's enough to buy and run some quite nice cars in itself.
If the black one literally is just the throttle body problem, there's modified throttle bodies that can be bought using digital throttle position sensors which will cure the troublesome throttle body problems that plague these cars. I very much doubt that it is just the 'body speaking from experience of how temperamental they can be!
In answer to your original question though, if you use Eurospares to keep parts prices to a minimum and do the work yourself, they're not really that much different from any other car. You just have to be able to get hold of a custom made diagnostic kit as it's pre-OBD and uses a Ferrari protocol iirc so it's either a Ferrari/Maserati dealer computer or something like what I had, bought from a member of the Maserati forum who had developed his own kit.
In answer to your original question though, if you use Eurospares to keep parts prices to a minimum and do the work yourself, they're not really that much different from any other car. You just have to be able to get hold of a custom made diagnostic kit as it's pre-OBD and uses a Ferrari protocol iirc so it's either a Ferrari/Maserati dealer computer or something like what I had, bought from a member of the Maserati forum who had developed his own kit.
Gassing Station | General Gassing | Top of Page | What's New | My Stuff



.