Help please - removing tree sap
Help please - removing tree sap
Author
Discussion

Vinny09

Original Poster:

249 posts

223 months

Saturday 10th August 2013
quotequote all
Hi,

I am trying to remove some baked on tree sap (coniferous trees) from my car. I have tried Autoglym tar remover but it hasn't touched it.

Any advice welcomed!

Thanks.

chris182

4,240 posts

184 months

Saturday 10th August 2013
quotequote all
I used the autoglym tar remover and had good results. Just scrubbing with it wasn't terribly effective but I soaked a bunch of kitchen roll in it and left it on the sap to soak for a while, seemed to help a lot. Maybe worth a try.

DHE

4,676 posts

221 months

Saturday 10th August 2013
quotequote all
If tar remover isn't shifting it, then claying the car will probably be the next step.

digger the goat

2,868 posts

176 months

Saturday 10th August 2013
quotequote all
WD40....OR Nail varnish remover...OR boiling water straight from the kettle..( try this first)

rolando

2,407 posts

186 months

Saturday 10th August 2013
quotequote all
A strong solution of soap in hot water has done it for me.

Then a chainsaw to deal with the tree.

jon-

16,534 posts

247 months

Saturday 10th August 2013
quotequote all
I ended up using wet and dry to remove some from an 85 635csi which had obviously sat under a tree for a lot of its life.

Nothing else touched it.

lufbramatt

5,697 posts

165 months

Saturday 10th August 2013
quotequote all
- very hot water and soap

- claybar

- If they don't work then a mild cutting compound might shift it.

If you use any of those methods it will strip the wax off so don't forget to give it a couple of layers of a decent wax afterwards.

Vinny09

Original Poster:

249 posts

223 months

Sunday 11th August 2013
quotequote all
Thanks all - I hadn't expected so many helpful suggestion so quickly!

smile

So I tried soaking cotton wool balls in the tar remover today and leaving them on the sap for 10-15' before washing off and it's got rid of about 50%. Probably more hot water needed.

I noticed someone had mentioned almost boiling water - is there any risk to the paintwork with this approach or is is designed to cope with high temperatures?

Thanks!