Wheel Balance issue
Discussion
Hi,
I've recently replaced all 4 tyres on my 2011 BMW 118d with non-runflat tyres and had puncturesafe installed in them.
Since then, I get a vibration in the seats at certain speeds on some roads. It appears to happen from 45 to 75mph but depending on the road surface/camber sometimes I don't get any vibration at all.
I've been back to the tyre place to have all of the wheels re-balanced but the problem persists.
Any ideas on whether this is an alignment issue or what else I should do?
Thanks,
--Jatinder
I've recently replaced all 4 tyres on my 2011 BMW 118d with non-runflat tyres and had puncturesafe installed in them.
Since then, I get a vibration in the seats at certain speeds on some roads. It appears to happen from 45 to 75mph but depending on the road surface/camber sometimes I don't get any vibration at all.
I've been back to the tyre place to have all of the wheels re-balanced but the problem persists.
Any ideas on whether this is an alignment issue or what else I should do?
Thanks,
--Jatinder
Hard to say but could be-
- Dodgy balance machine where you're taking it, try elsewhere
- One of the new tyres may be warped (get someone who knows how to spot this to check them)
- One or more of the wheels may be warped (as above, can be spotted IF they're looking for it on the balancing machine)
- Puncturesafe goop may be causing problems if it's not evenly distributed
Gassing Station | General Gassing | Top of Page | What's New | My Stuff


