ETA2824 Gaining 7 secs per minute !!
ETA2824 Gaining 7 secs per minute !!
Author
Discussion

RLK500

Original Poster:

917 posts

283 months

Wednesday 14th August 2013
quotequote all
The Automatic movement in my O&W M4 appears to have gone nuts. It's gaining around 7 secs every minute. I guess this isn't a case of a little adjustment. Anyone have an idea what might have gone wrong, I am looking at having Ryetime take a look, but just interested if anyone has any wisdom to share before I do.

PJ S

10,842 posts

258 months

Wednesday 14th August 2013
quotequote all
How old is the watch?

Hoofy

80,170 posts

313 months

Wednesday 14th August 2013
quotequote all
Magnetised?

westberks

1,462 posts

166 months

Wednesday 14th August 2013
quotequote all
fooked?

Tanguero

4,535 posts

232 months

Wednesday 14th August 2013
quotequote all
Hoofy said:
Magnetised?
This most likely.

Mr Will

13,719 posts

237 months

Wednesday 14th August 2013
quotequote all
My Tissot has done this a couple of times. It seems that it starts to do it if you leave the chronometer running continuously (we're talking days/weeks here, not hours). Unfortunately once it starts doing it I've not found a way of stopping it except sending it off for a service frown

RLK500

Original Poster:

917 posts

283 months

Wednesday 14th August 2013
quotequote all
Watch is 3 years old. Don't know how it would have become magnetised, wear it as my daily beater, have done nothing unusual or been anywhere different. Very strange.

Mr_C

2,508 posts

260 months

Wednesday 14th August 2013
quotequote all
One of my seiko 7s36's gains about 15secs/day, can this be adjusted out?

Tanguero

4,535 posts

232 months

Wednesday 14th August 2013
quotequote all
RLK500 said:
Watch is 3 years old. Don't know how it would have become magnetised, wear it as my daily beater, have done nothing unusual or been anywhere different. Very strange.
Impossible to be sure of the cause without inspecting the watch but I am sure Rytetime will sort it out.

If its worn daily it could well have been inadvertently magnetised or received a knock that jumped a hairspring coil over the regulating pin, or a good number of other possibilities for it suddenly starting to gain so much.

Tanguero

4,535 posts

232 months

Wednesday 14th August 2013
quotequote all
Mr_C said:
One of my seiko 7s36's gains about 15secs/day, can this be adjusted out?
That depends on if it is just badly adjusted or if there is some other underlying problem. On the face of it 15s/day is within the range of adjustment but that is assuming that there is no other problem.

Mr_C

2,508 posts

260 months

Thursday 15th August 2013
quotequote all
Tanguero said:
That depends on if it is just badly adjusted or if there is some other underlying problem. On the face of it 15s/day is within the range of adjustment but that is assuming that there is no other problem.
Thanks. At 5pm today I'll know exactly how far out it is. Looking like its about 10secs really. Can any local watch shop adjust it?

Is it likely to settle down? It's only about a month old, but I don't really want to send it back to creation.

Tanguero

4,535 posts

232 months

Thursday 15th August 2013
quotequote all
Mr_C said:
Thanks. At 5pm today I'll know exactly how far out it is. Looking like its about 10secs really. Can any local watch shop adjust it?

Is it likely to settle down? It's only about a month old, but I don't really want to send it back to creation.
If the rate does "settle down" then that is indicative of a more serious problem - the rate should be fairly constant in any given position. If the rate stays stable then it may be a matter of adjustment.

Seiko don't publish a rate range fro that movement, but 15 is just about within the acceptable range for that quality of movement. Anecdotally they can hold a rate of +-6 s/d if you have a goodun and it is well adjusted. But I would ask Creation what rate they would expect before assuming there is a problem and sending it back.

456GT

301 posts

209 months

Thursday 15th August 2013
quotequote all
Tanguero said:
Hoofy said:
Magnetised?
This most likely.
How much of a problem is magnetisation? How does this happen?

I always wonder this when I look at watches that are advertised as being resistant to magnetism. Which group of people would need them?

Tanguero

4,535 posts

232 months

Thursday 15th August 2013
quotequote all
If an old style steel hairspring becomes magnetised, you tend to get two (or more) coils sticking together, which dramatically changes the rate. Given how fine the hairspring is and how close together the coils lie, it doesn't take very much magnetism to do that.

Obviously modern Invar, Elinvar and Nivarox springs are very much less sensitive to that problem, but a magnetised watch can misbehave for all sorts of reasons. Given that it is a 10 second job to demagnetise, its probably a good starting point.

Ev_

190 posts

294 months

Thursday 15th August 2013
quotequote all
456GT said:
How much of a problem is magnetisation? How does this happen?
It's not a big problem, and can be cured in a few seconds if you've got a demagnetiser.

It can happen if the watch is exposed to a magnetic field. An obvious one is a loudspeaker of some kind. I've learned the hard way that one of my watches particularly doesn't like being left next to the kitchen radio while I do the washing up...

JRewing

17,551 posts

210 months

Thursday 15th August 2013
quotequote all
Ev_ said:
456GT said:
How much of a problem is magnetisation? How does this happen?
It's not a big problem, and can be cured in a few seconds if you've got a demagnetiser.

It can happen if the watch is exposed to a magnetic field. An obvious one is a loudspeaker of some kind. I've learned the hard way that one of my watches particularly doesn't like being left next to the kitchen radio while I do the washing up...
As said, it's not a major problem. It can happen for multiple reasons. I've heard of people leaving them on top of VCRs and all sorts of things.

And to another poster - somebody typically in need of one would be a power station worker (that was the brief for the original Rolex Milgauss, I believe).

I've heard of people managing to demagnetise them by putting the watch beside a CRT TV screen and turning it off, and also using the guns in libraries and shops etc which deactivate the warning sensor things which prevent items being removed from the premises. However I have no idea of the success rate using these.....

Tanguero

4,535 posts

232 months

Thursday 15th August 2013
quotequote all
You can get a perfectly serviceable watch demagnetiser for under a tenner on fleabay.

http://www.ebay.co.uk/sch/i.html?_trksid=p2050601....

Mr_C

2,508 posts

260 months

Thursday 15th August 2013
quotequote all
Tanguero said:
If the rate does "settle down" then that is indicative of a more serious problem - the rate should be fairly constant in any given position. If the rate stays stable then it may be a matter of adjustment.

Seiko don't publish a rate range fro that movement, but 15 is just about within the acceptable range for that quality of movement. Anecdotally they can hold a rate of +-6 s/d if you have a goodun and it is well adjusted. But I would ask Creation what rate they would expect before assuming there is a problem and sending it back.
Just checked at its actually +6 to 7 secs so not too bad...