Gucci 8900l Spruce up (sentimental value)
Discussion
This was my wife's first nice watch. The gold plating on the bezel is wearing thin so I'd like to get it changed for her.
Kits are available off eBay etc for c£60. Any recommendations for supply & fit in the UK or fit only?
Thanks,
Simon
Kits are available off eBay etc for c£60. Any recommendations for supply & fit in the UK or fit only?
Thanks,
Simon
Edited by Squadrone Rosso on Friday 16th August 03:28
The problem is going to be that it is extremely difficult to make a satisfactory job of re-plating a watch. The original plate needs to be removed completely down to bare base metal, then the base polished before applying a seed layer of copper plate then the final gold. You can't just put more gold over a worn plate, it won't adhere and will show every mark of the underlying surface.
The watch you mention doesn't have a bezel in the traditional sense. From the pictures on the web it appears that the 'bezel' is integrated with both the case and the bracelet and would be nigh on impossible to remove from the case. If it is possible to re-plate it at all, I suspect it would be a very expensive job.
The watch you mention doesn't have a bezel in the traditional sense. From the pictures on the web it appears that the 'bezel' is integrated with both the case and the bracelet and would be nigh on impossible to remove from the case. If it is possible to re-plate it at all, I suspect it would be a very expensive job.
Thanks.
This is what I meant by bezel, sorry. More a case.
http://www.ebay.co.uk/itm/NIB-Gucci-Replacement-Ca...
Looks like you just swap the movement over.
This is what I meant by bezel, sorry. More a case.
http://www.ebay.co.uk/itm/NIB-Gucci-Replacement-Ca...
Looks like you just swap the movement over.
Gassing Station | Watches | Top of Page | What's New | My Stuff


