Saggy running off

[Hollowpockets]

Hi all,

I've had the Sag out recently and when it gets up to full running temp it really struggles to idle properly, often cuts out and doesn't want to re-start again.

Can anyone shed any light on this and if there's anything I can do to improve it until service time next month.

cheers

Graham

[Overseas]

Do you have the tuning software? If not give Neil / David a shout?

R
(Sagless in Baku)

[Hollowpockets]

No I'll need to get a hold of it.

Will give Neil a shout.

Cheers

[WolfyJones]

Lambda sensor ?

[VARLEYHYD]

Disconnect the air box temp plug from its sensor, then see how it idles.

This should default the ECU temp reading, kidding the ECU/lambdas.

If it works, probably lambda earths/-ve, however don't use high revs as it will likley detonate.

GV

[Jhonno]

VARLEYHYD said:

Disconnect the air box temp plug from its sensor, then see how it idles.

This should default the ECU temp reading, kidding the ECU/lambdas.

If it works, probably lambda earths/-ve, however don't use high revs as it will likley detonate.

GV

Shirley it should default it to a safe rich setting?!

[VARLEYHYD]

Jhonno said:

VARLEYHYD said:

Disconnect the air box temp plug from its sensor, then see how it idles.

This should default the ECU temp reading, kidding the ECU/lambdas.

If it works, probably lambda earths/-ve, however don't use high revs as it will likley detonate.

GV

Shirley it should default it to a safe rich setting?!

That's what you would think! , but no, so be safe when you try it!

[puckrup]

I have the software, laptop, cable, air flow meter and the GVOB..............sorted! Can drop off over weekend. Worth taking to Monza?

Neil