How to outsource code development
Discussion
Hello
I have a rather large project at work that may well have to rely on outsourcing some code development.
This is something that we've not previously had to do and I am left wondering how best to go about it.
I know this practive happens frequently with web design etc but the code in question here is for PLCs, small computers that run industrial facilities. There is a standard for this but it tend to have a diiferent flavour amongst the different hardware manufacturers.
A fairly detailed 'spec' can be sent but ultimately I'm sure there would be some tuning/fault finding when it comes to commissioning in the UK when hooked up to machines.
Any pointers greatly appreciated.
I have a rather large project at work that may well have to rely on outsourcing some code development.
This is something that we've not previously had to do and I am left wondering how best to go about it.
I know this practive happens frequently with web design etc but the code in question here is for PLCs, small computers that run industrial facilities. There is a standard for this but it tend to have a diiferent flavour amongst the different hardware manufacturers.
A fairly detailed 'spec' can be sent but ultimately I'm sure there would be some tuning/fault finding when it comes to commissioning in the UK when hooked up to machines.
Any pointers greatly appreciated.
What the others guys have said. Do not under estimate the communication barrier when explaining/documenting what you want. They will say they understand even if they don't, pot luck if you get back something that is close to what you wanted.
Write down exactly what you want - use case, workflows, design, mock up screenshots, test plans.. everything.
As someone said, you'll need someone to manage the relationship, possibly full time.
I would look at hiring a contractor/freelancer here. You may not end up with better code, but you will find the communication easier and are more likely to get a result. You could even look at a company who will do the work for you - if they choose to use outsourcers thats their problem!
I'm working on a system with three other parts of our business at the moment. We have more people organising the work and dealing with the relationships than we do writing code/testing etc.
Its working and there are other benefits to the set up (which is one reason why we do it), but for a small company/start up it can be a nightmare.
Write down exactly what you want - use case, workflows, design, mock up screenshots, test plans.. everything.
As someone said, you'll need someone to manage the relationship, possibly full time.
I would look at hiring a contractor/freelancer here. You may not end up with better code, but you will find the communication easier and are more likely to get a result. You could even look at a company who will do the work for you - if they choose to use outsourcers thats their problem!
I'm working on a system with three other parts of our business at the moment. We have more people organising the work and dealing with the relationships than we do writing code/testing etc.
Its working and there are other benefits to the set up (which is one reason why we do it), but for a small company/start up it can be a nightmare.
I am an IT director and have used many outsouce partners from across the globe
For small to meduim projects (less than a couple hundred man days) I use a UK based company that has resource in Eatern Europe.
Costs are on par with UK resource but quality is signifantly higher (and therefore the overall project cost ends up lower)
Having a UK head office and management team means communication and escalation is not an issue.
Drop me a PM if you want details
For small to meduim projects (less than a couple hundred man days) I use a UK based company that has resource in Eatern Europe.
Costs are on par with UK resource but quality is signifantly higher (and therefore the overall project cost ends up lower)
Having a UK head office and management team means communication and escalation is not an issue.
Drop me a PM if you want details
The project I'm involved with at the moment started off being coded in India (I'm a tester, so not up on the jargon etc)
However, due to the vague instructions from the business,the development company doing a hash job coding, the business requirements then changing etc it was canned after a year andbought in-house.
Now, it's been almost completely re-written in-house using hired java guys, and 4 years and several million quid later it's just about to enter Parralel Run, despite it needing re-UATing as it's a different system now to what it was.
Anyway, check the code and resulting software carfully, we did and luckily got most of the money back, but not after some hefty court battles. Was based over in Bangalore I think. Every now and again one of the java guys comes across some of the recycled code and swears slightly
However, due to the vague instructions from the business,the development company doing a hash job coding, the business requirements then changing etc it was canned after a year andbought in-house.
Now, it's been almost completely re-written in-house using hired java guys, and 4 years and several million quid later it's just about to enter Parralel Run, despite it needing re-UATing as it's a different system now to what it was.
Anyway, check the code and resulting software carfully, we did and luckily got most of the money back, but not after some hefty court battles. Was based over in Bangalore I think. Every now and again one of the java guys comes across some of the recycled code and swears slightly
mattdaniels said:
I've dealt with outsourcing to India, China and Russia in my career.
Don't. Just don't. In the long run, it's a false economy.
I can agree with you about India and China.Don't. Just don't. In the long run, it's a false economy.
On one project I worked on, we had to use the Unix special /usr/bin/rm compiler
on the delivered source code from India, it was that good ;->
For all the other projects I worked on where coding or design was outsourced
to I or C, it was merely the case that significant rework was required back in
the UK before delivery to Alpha test could be attempted.
Only worked on one project with the Russians: they seemed pretty competent.
We had some code from India....
It was Client Server pairings..
When we initially ran the code we couldn't believe the speed of it, it was extremely rapid, much faster than anything we'd achieved. We then looked at the code and realised that none of the Client code was actually calling any of the Servers, instead all the information was being set within the Clients... f*ck!! In the end they requested 8 of the Indian developers to come over to the UK to fix all the problems..
It was Client Server pairings..
When we initially ran the code we couldn't believe the speed of it, it was extremely rapid, much faster than anything we'd achieved. We then looked at the code and realised that none of the Client code was actually calling any of the Servers, instead all the information was being set within the Clients... f*ck!! In the end they requested 8 of the Indian developers to come over to the UK to fix all the problems..
When you do find someone to do it ... get someone who knows what they are talking about to draft the contract. 
The ultimate reasons for dissatisfaction are badly drafted specs and badly drafted contracts. Make it very clear what you want, and what happens if you don't get it. Beware wilful misinterpretation.

The ultimate reasons for dissatisfaction are badly drafted specs and badly drafted contracts. Make it very clear what you want, and what happens if you don't get it. Beware wilful misinterpretation.
My experience of outsourcing would suggest that unless you're very precise and exacting it is a false economy. We found that by the time we'd written designs and specifications to enough detail for the offshore coders to develop, we may as well have written the code ourselves. In the end the level of rework required negated any cost benefits. Obviously the "blame" for this can be freely distributed around the project - poor specs, poor feedback from the developers, poor/slow QA of the product, but the physical separation and language/cultural barrier between the designers and the coders did not help at all.
ewenm said:
My experience of outsourcing would suggest that unless you're very precise and exacting it is a false economy. We found that by the time we'd written designs and specifications to enough detail for the offshore coders to develop, we may as well have written the code ourselves. In the end the level of rework required negated any cost benefits. Obviously the "blame" for this can be freely distributed around the project - poor specs, poor feedback from the developers, poor/slow QA of the product, but the physical separation and language/cultural barrier between the designers and the coders did not help at all.
Very true, I have done this for over 5 years for 80% of my core business. What he says above and others do is correct. Unless you know what you are doing, who you are working with and how to get the best from them, DON'T BOTHER. People are blinded by the savings but it's false economy. Done right it's good but the margins today aren't what they sued to be.Feel free to PM me
Gassing Station | Business | Top of Page | What's New | My Stuff


