400se timing

[barrington]

can any one tell me what the timing should be on the 400se ive looked in the bible but never shore on what you read in there cheers

[njhucker]

If it's a hotwire. then 8 degrees BTDC at 680 rpm measured with the stepper motor sealed off.

[barrington]

cheers should of said its a flapper

[wild rover]

Set my 390at 8 degrees with the vacuum pipe removed, proved to be spot on,no pinking and passed on the rolling road.

[barrington]

cheers

[Wedg1e]

wild rover said:

Set my 390at 8 degrees with the vacuum pipe removed, proved to be spot on,no pinking and passed on the rolling road.

Mine's about 8 deg. BTDC as well.