Audio expert required, Amp powers, cables all goods no sound
Discussion
Having bought a new car, it had pre installed cabling for the audio system, it uses fusion 4awg cables.
So far the amp powers up fine, the Power shows a solid 14.2 volts, that goes down as the volume is raised, so power is fine, ground is good, Remote is fine as it triggers it on or off, RCA cable isn't the problem as we've tested 3 different ones, not the stereo either as we've tested 2.
Just to clarify
Amp powers up
Remote triggers it on and off
Multiple RCa's tested
Multiple stereos tested
Multiple amps tested
Multiple speakers tested
Different speaker cables tested
So what's the problem, the whole system was working in my old car the day it was removed.
We didn't wire the system in the new car in, but we can see all cables/fuses are good and done properly.
Any body got any ideas as for the solution?
So far the amp powers up fine, the Power shows a solid 14.2 volts, that goes down as the volume is raised, so power is fine, ground is good, Remote is fine as it triggers it on or off, RCA cable isn't the problem as we've tested 3 different ones, not the stereo either as we've tested 2.
Just to clarify
Amp powers up
Remote triggers it on and off
Multiple RCa's tested
Multiple stereos tested
Multiple amps tested
Multiple speakers tested
Different speaker cables tested
So what's the problem, the whole system was working in my old car the day it was removed.
We didn't wire the system in the new car in, but we can see all cables/fuses are good and done properly.
Any body got any ideas as for the solution?
Gassing Station | General Gassing | Top of Page | What's New | My Stuff


